%F0331A Castro 2D curved mixing layer
%J. Fluid Mech. vol. 73, p. 265 (1976)
%Two sets of coordinates are used; offset r, theta coords.
%for highly-curved initial region (theta increasing with
%streamwise distance) and x,y coords. for straighter
%downstream section. 
%
%Part 1 -  Mean flow measurements in curved section
%Part 2 - Turbulence measurements in curved section
%Part 3 Turbulence measurements in straight section
%Part 4 Reference streamline
%
%__________________________________________________
%
%Part 4 Reference streamline
%
%Given below is the radius Rref of a reference
%streamline in the POTENTIAL FLOW (curved portion only),
%together with arc distance along this streamline
%and its vertical continuation, measured from
%the nozzle plane. Origin of polar coords. is 0.126m
%downstream of nozzle plane and 0.251m above it.
%All distances in meters.
%
%Curved portion:
%      theta  Rref  arc dist.  points on hotwire
%                              profile  
       0.00  0.2866  0.1260      8
       10.00 0.2866  0.1680      10
       20.00 0.2903  0.1680      10
       30.00 0.2959  0.2550      9
       40.00 0.3000  0.2990      13
       50.00 2.9780  0.3440      13
       60.00 0.2875  0.3880      10
       70.00 0.2781  0.4310      8
       80.00 0.2716  0.4720      11
       90.00 0.2706  0.5120      11
%
%    Vertical portion
%        x    arc dist.   points on hotwire
%                         profile
       0.2770  0.5360      11
       0.3520  0.6110      11
       0.4270  0.6860      12
       0.5560  0.8150      11
       0.6280  0.8870      12
       0.7080  0.9670      12
       0.7820  1.0410      12