Summary of traverses in asymmetric wake All velocities normalised by powers of Ue (nom. 9.6 m/s) a301.dat U, u2, u3, u4, Su, Ku at x = 301 mm a302.dat U, u2, u3, u4, Su, Ku, uv, u2v, uv2, v3, v4, Sv, Kv, w2, uw2, w4, Kw at x = 302 mm a304.dat U, u2, u3, u4, Su, Ku, uv, u2v, uv2, v3, v4, Sv, Kv, w2, uw2, w4, Kw at x = 304 mm a305.dat U, u2, u3, u4, Su, Ku, uv, u2v, uv2, v3, v4, Sv, Kv, w2, uw2, w4, Kw at x = 305 mm a310.dat U, u2, u3, u4, Su, Ku, uv, u2v, uv2, v3, v4, Sv, Kv, w2, uw2, w4, Kw at x = 310 mm a320.dat U, u2, u3, u4, Su, Ku, uv, u2v, uv2, v3, v4, Sv, Kv, w2, uw2, w4, Kw at x = 320 mm a340.dat U, u2, u3, u4, Su, Ku, uv, u2v, uv2, v3, v4, Sv, Kv, w2, uw2, w4, Kw at x = 340 mm a380.dat U, u2, u3, u4, Su, Ku, uv, u2v, uv2, v3, v4, Sv, Kv, w2, uw2, w4, Kw at x = 380 mm a460.dat U, u2, u3, u4, Su, Ku, uv, u2v, uv2, v3, v4, Sv, Kv, w2, uw2, w4, Kw at x = 460 mm a580.dat U, u2, u3, u4, Su, Ku, uv, u2v, uv2, v3, v4, Sv, Kv, w2, uw2, w4, Kw at x = 580 mm a1000.dat U, u2, u3, u4, Su, Ku, uv, u2v, uv2, v3, v4, Sv, Kv, w2, uw2, w4, Kw at x = 1000 mm a1240.dat U, u2, u3, u4, Su, Ku at x = 1240 mm a1960.dat U, u2, u3, u4, Su, Ku, uv, u2v, uv2, v3, v4, Sv, Kv, w2, uw2, w4, Kw at x = 1960 mm acl.dat x, U, u2, u3, u4, Su, Ku along geometric wake centreline aips.dat x, b+, b-, b, theta+, theta-, theta, delta*+, delta*-, delta, H+, H-, H, Wo, camber line spectra u' spectra at x = 305, 310 and 340 mm astrain.dat x, dU/dx on geometric centreline, max dU/dy on + side, magnitude of min dU/dy on - side ** Integral parameters are evaluated individually on positive and negative sides of asymmetric wake (+ and -) and are then summed or averaged across the two sides of the wake to provide a total value. Thus in file aips.dat b+ corresponds to the positive side of the wake, b- corresponds to the negative side of the wake and b is the wake half width for the whole asymmetric wake and so on. *** Note that the ys used for the wake traverses are taken from the geometric wake centreline NOT the surface of the plate as for the boundary layer traverses. To convert add 0.48 mm to the boundary layer values of y.