U-bend circular cross section
Authors: Azzola J., Humphrey J.A.C.,
Type: Experimental
Status:
Contents
Description
Flow Parameters
Reference Publications
Results
Description
Turbulent isothermal flow in a 180 degree pipe bend. Several experimental works are available (1, 2) along with a number of numerical investigation (2, 4, 5). Reference 3 reports also a case with heat transfer. Results are compared with the above mentioned experimental results (velocity profiles at different section of the domain).
Geometry definition
The geometry is presented in Fig. 1, with the following parameters:
- Diameter:
- Radius of curvature of the bend:
|
Fig. 1: Geometry of the U-bend test case |
Flow Parameters
The flow parameters are the following
- Dynamic viscosity:
- Density :
- Bulk velocity :
- Reynolds number :
Reference Publications
- Azzola J., Humphrey J.A.C., Developing turbulent flow in a 180 degree curved pipe and its downstream tangent, Report LBL-17681, Material and Molecular Research Division, Lawrence Berkeley Laboratory, University of California.
- Azzola J., Humphrey J.A.C., Iacovides H., Launder B.E., Developing turbulent flow in a U-bend of Circular Cross-Section : Measurement and Computation, Transaction of the ASME, Vol. 108, pp. 214-221, June 1986.
- Baughn J.W., Iacovides H., Jackson D.C., Launder B.E., Local heat transfer measurements in turbulent flow around a 180 degree pipe bend, Journal of Heat Transfer, pp. 43-48, Vol. 109, 1987.
- So R.M.C. , Zhang H.S., Lai Y.G., Secondary cells and separation in developing laminar curved pipe flow, Theoretical and Computational Fluid Dynamics, pp. 141-162, 1991.
- So R.M.C., Zhang H.S., Lai Y.G., Turbulence driven secondary flow in a curved pipe Theoretical and Computational Fluid Dynamics, pp. 163-180, 1991.
Results
Simulation results available for this case:
Number of topics: 1
.
Add New Results Here.
To add results please fill in the form by clicking on the
CREATE button below. You will need to provide all the information on the form.
Please select which group or groups can access the information from the list. If you
don't want to restrict the access, please select
None.