50 Recent Changes in Forum Web retrieved at 02:41 (GMT)

Statistics for nop Forum Web Month: Topic views: Topic saves: File uploads: Most popular topic views: Top contributors for topic save ...
Is there a complete test case to be used as a tutorial for DDES AshrafHussein 2012 08 05
Hello everybody, I #39;m a student of the University of Modena and Reggio Emilia, Italy. I #39;m designing an Inertial Impactor for particles sampling so I learned ...
FabioPaglione 2012 07 11 Hello everybody, I'm a student of the University of Modena and Reggio Emilia, Italy. I'm designing an Inertial Impactor for particles sampling ...
Hello everybody, I'm a student of the University of Modena and Reggio Emilia, Italy. I'm designing an Inertial Impactor for particles sampling so I learned to use ...
I have installed code Saturne version 2.0.0 rc2. It works in terms of gui opening. However whenever I try to check my mesh I see nothing in gui output. Further if ...
UsamaSabir 2011 08 06 UsamaSabir 2011 08 06 UsamaSabir 2011 08 06 UsamaSabir 2011 08 06 i made amistake in posting the problem so the next post regarding ...
I modified some parameters in the turbke.f90 routine to obtain the same system of equations proposed by the Realizable model. In the comparison of these two models ...
Apparently, my description of the file did not get included in the original post. This is a study of heating a fluid in a rectangular capillary using Code Saturne ...
hi all. I #39;m trying to install the V2.0.1. I download all files bft 1.1.4 ecs 2.0.1 fvm 0.15.2 mei 1.0.2 ncs 2.0.1, and then configure them. But it give me ...
Dear all, I do my simulation for periodic boundary conditions, I have use Sylvain #39;s ustsns.f90 subroutine: https://code saturne.info/products/code saturne/forums ...
hello, Please i want an answer for these questions: 1 in the subroutine #34;ustsns #34; qdm it means? 2 in Results for case Channel Flow (cited as a test case on ...
http://cfd.mace.manchester.ac.uk/twiki/bin/view/Main/PressureProblem My problem is very simple: when I impose a fluctuating mass flow rate using usclim in a LES or ...
Hello, I am a new user of code saturne and I am very interesting by the test case5. Is there already done the file ustsns.f90 ? And may be with some explanations. ...
Hello, Can some tell me if subdivision of unstructured hexahedral cells into tetrahedra is possible with out numerical problems DavidOlivieri 2010 07 29 DavidOlivieri ...
I am having trouble running premixed combustion. I use usebu1, usebui and usebuc along with usini1. But when I run the simulation it comes up with an error saying ...
hi, i just discovered this forum and i´m very glad i´ve found a place to ask some questions. i´m currently working on a valvula for a pump (see attached picture) and ...
Hi, I am simulating a bluff body using code Saturne. In my case , I wish to use a Free Stream turbulence (FST) at the boundary. I already have a FST model i.e. streamwise ...
I #39;m using usproj.F to print some results .dat files, but i didn #39;t find any .dat file in tmp Saturne file, the usproj.F i used it is attached. MahmoudAssad ...
Can I ask if I am doing anything wrong when doing RESTARTS for a STEADY calculation with Code Saturne (v2rc2). I have a simple, single file mesh. Boundary conditions ...
Hello, I am trying to install code saturne in my ubuntu 64, 10.04. I have try almost everything available in the web without success. Fortunately I was able to install ...
Hello. I #39;ve just been using the check mesh funtion in CS 2.0.0 rc2 to verify a mesh I created in ICEM for investigating a wing tip flow. This is throwing up some ...
Hello, I #39;ve problem in RSM for combustion especially 2D test cases. I noticed some term in RSM are inactive such as IRIJEC, IRIJNU, IRIJRB. Has anybody ran ...
Has anyone ran a simulation of rc2 on Mace01? My calculations are stopping mid way through the first time step with a floating point error? Attached listing and error ...
Hi, could you share a usproj.F, that computes drag and lift forces for a code saturne 1.4 environment? i cant figure out syntaxe. also, how to read it in paraview ...
I #39;m trying to print out the residuals to a file and using the DERVAR array which seems to be okay, DERVAR(3) (7) lists the respective residuals of u, v, w, k, ...
Bonjour Je cherche à avoir les résultats de calcul sur toute une surface ( par exemple les vitesses sur tous les noeuds ) est ce faisable ?? quel subroutine utiliser ...
can somebody explain me the option #34; zero iteration #34; ?? ( on the GUI section : calculation control ) thanks YasmineMira 2010 06 23 Hi, a good way to ...
hi can somebody tell me how to do if i want to use more than one processor ?? i want reduce my time of calculation so i thaught to use the 2 processors of my machine ...
My very first post RodBeckstrom 30 Jul 2007 hello world PeterThoeny 28 Sep 2007 1) 2) #37;BR #37; 3) #60;br #62; 4) /n 5) AlistairRevell 2009 11 25 ...
Hi, I am trying to calculate forces on surfaces leading up to drag and lift etc. Is there anywhere within CS where stress forces are stored on boundary surfaces? Thanks ...
Hi i was wondering if there is a way to verify the mesh before starting calculation . ps : i #39;m using saturne 1.4 and salome 5.1.3 thanks YasmineMira 2010 ...
Hi everybody i tried to refine my mesh on a party of my wall. when i run calculation, i have this message : @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ ...
Hello, I’m doing a research on the use of Open Source Software in Fire Simulation. There I found this one. For my research, I’m interested in the accuracy of Code ...
Good morning i #39;m using code saturne for the first time, and i have some questions about ushist subroutine. I #39;am studying a pipe flow, and i wan #39;t to recover ...
Before installing ' The Xcode developer tools package ', I had not the ' install '. You can download it from internet https://developer.apple.com/technology/tools ...
I am modelling the flow around a ringwing and would like to use several meshed 6 sided blocks with different cell size each. The wing itself is fully inside one of ...
I installed Saturne 2.0 4 from Debs. The GUI runs fine, but the solver keeps crashing. I #39;ve seen a bug similar to this elsewhere, but I thought it was fixed. SIGFPE ...
Hi, I #39;m performing some LES of turbulent flow past bluff body using code saturne. During this, I want to create the magnitude of strain rate as a variable for ...
Hi, I built my mesh in Star ccm and exported it in Ensight Gold format (.case). I am trying to import it in Code Saturne but the boundary regions aren #39;t detected ...
Hello, all. I am trying to learn Code Saturne, using the Salomé 4.1.4 Code Saturne 1.3.3 package made available to us here. I have with some succes made a few ...
Hello, I can #39;t run 2d simulations with Code saturne. I use Gmsh for the preprocessing and I have seen on the Code Saturne #39;s tutorials that my mesh file should ...
Hi, I am very encouraged by the new Code Saturne for Salome, as I failed to install it, myself. Can the plugin be installed into the pre compiled Salome 64 Universal ...
Hello, I use Gmsh to do the preprocessing. I would like to do a sizefunction like with Gambit, but I don #39;t know how to do that. Any idea? StephaneBlanchet ...
I was just wondering if anyone has tried to implement the yap term correction into any models? I know its in quite a few of the other commercial packages such as Star ...
Any idea on how to read a tecplot (.plt) format mesh into saturne? Has anyone used a tecplot format mesh before?? Thanks NeilAshton 2010 02 16 Hello, Code Saturne ...
I have had a look at the wiki help pages but I am still unsure of how to restrict access to different parts of my page. Can someone show the syntax of the IF commands ...
Number of topics: 50

See also: rss-small RSS feed, recent changes with 50, 100, 200, 500, 1000 topics, all changes


Current Tags:
create new tag
, view all tags
Topic revision: r3 - 2006-11-15 - 19:43:52 - TWikiContributor
 

Computational Fluid Dynamics and Turbulence Mechanics
@ the University of Manchester
Copyright © by the contributing authors. Unless noted otherwise, all material on this web site is the property of the contributing authors.

%TMPL:DEF{"top:toolbarbuttons"}Raw editAttachPrint version