%{ }% %{ DEFINITIONS }% %{ }% %TMPL:DEF{"photo_name"}%PatternSkinUserViewTemplate_photo.jpg%TMPL:END% %TMPL:DEF{"up_photo_perso"}%
%TMPL:DEF{"useroptions"}%
%{ CONTENT }%
%TMPL:DEF{"content"}%
%{ }% %{ table of information, photo, user controls }% %{ }%

,



Research Interests:


Contact Details:
: , : : : 
%{ }% %{}% %{ }%
%TEXT%
%{set search variable to username}%
Research Publications: Research Publications:
A Stressstrain Lag Eddy Viscosity Model for Variable Density Flow, Assad, M, . Prosser, R., Revell, A., Sapa, B., ERCOFTAC Bulletin, Vol. 96, pp. 410, (2013)  
Development of an Alternative Delayed DetachedEddy Simulation Formulation Based on Elliptic Relaxation, N. Ashton, A. Revell, R. Prosser, J. Uribe, AIAA journal, Vol. 51, pp. 513519, (2013)  
A New Divergence Free Synthetic Eddy Method for the Reproduction of Inlet Flow Conditions for LES, R. Poletto, A. Revell, T. Craft, Journals of Flow, Turbulence and Combustion, (2013)  
A New Divergence Free Synthetic Eddy Method for the Reproduction of Inlet Flow Conditions for LES, R. Poletto, A. Revell, T. Craft, Journal of Flow, Turbulence and Combustion, (2013)  
A NEW DIVERGENCE FREE SYNTHETIC EDDY METHOD FOR FULL REPRODUCTION OF INLET FOR EMBEDDED LES, R. Poletto, A. Revell, T. Craft, ETMM 9  Tessaloniki, (2012)  
CFD prediction of turbulent flow on an experimental tidal stream turbine using RANS modelling, James McNaughton , Stefano Rolfo, David Apsley, Imran Afgan, Peter Stansby, Tim Stallard, 1st Asisan Wave and Tidal Energy Conference, Jeju Island, South Korea, (2012)  
Computation of Turbulent Natural Convection Flow Inside Horizontal Cylindrical Penetration Enclosure Using URANS and LES Approches (ABSTRACT), D. Ammour, T. J Craft and H. Iacovides, THMT (7th International Symposium on Turbulence, Heat and Mass Transfer) 2012, September 2427, (2012)  
Impact of Coflow Air on Buoyant Diffusion Flames Flicker, H. Gohari Darabkhani, Q. Wang, L. Chen and Y. Zhang, Energy Conversion and Management (ECM), Vol. 52, pp. 29963003, (2011)  
Model Validation for Buoyancy Driven Flows Inside 2D DifferentiallyHeated Cavities., D. Ammour, T. J. Craft, H. Iacovides, UKHTC (UK Heat Transfer Conference) 2011. Leeds, UK., (2011)  
DEVELOPMENTS IN TWOTIMESCALE TURBULENCE MODELS APPLIED TO NONEQUILIBRIUM FLOWS, T. Klein, T. Craft and H. Iacovides, TSFP7, (2011)  
Embedded DDES of 2D hump flow, R. Poletto, A. Revell, T. Craft, N. Ashton, HRLM 4  Beijing, (2011)  
LES and URANS Numerical Analysis of Turbulent Natural Convection Flow Inside 3D Rectangular Tilted Differentially Heated Cavities (ABSTRACT), D. Ammour, T. J. Craft, H. Iacovides, ETMM9 (9th International ERCOFTAC Symposium on Engineering Turbulence Modelling and Measurements) 2011, 68 June 2011. Thessaloniki, Greece., (2011)  
FluidStructure Interactions: A Brief Review of Existing Strategies, M. YaAlimadad, R. Prosser, K. Davey, ERCOFTAC bulletin, Vol. 86, pp. 1720, (2011)  
Thermalhydraulic simulations of a wire spacer fuel assembly, S. Rolfo, C. Peniguel, M. Guillaud and D. Laurence, Submitted to Nuclear Engineering and Design, (2011)  
Divergence Free Synthetic Eddy Method for Embedded LES inflow Boundary Conditions, R. Poletto, A. Revell, T. Craft, N. Jarrin, 7th TSFP  Ottawa, (2011)  
LES and URANS Numerical Analysis of Turbulent natural Convection Flow Inside 3D Rectangular Tilted DifferentiallyHeated Cavities (POSTER), D. Ammour, T.J. Craft, H. Iacovides, PGR 2011, (2011)  
Soot Concentration and Temperature Measurements in Coflow Laminar PropaneAir Diffusion Flames at Pressures up to 7 bar, H. Gohari Darabkhani, J. Oakey, and Y. Zhang, Proceedings of 49th AIAA Aerospace Sciences Meeting, Vol. Paper No.: AIAA 2011243, (2011)  
Application of Recently Developed Elliptic Blending Based Models to Separated Flows, Flavien Billard, Alistair Revell and Tim Craft, Submitted to International Journal of Heat and Fluid Flow, (2011)  
Improving Stability Limits of Natural Gas Buoyant Diffusion Flames with Coflow of Air, H. Gohari Darabkhani, J. Oakey, Y. Zhang, Energy Sustainability Conference & Fuel Cell Conference (ESFuelCell2011), 710 August 2011, Washington DC, USA, (2011)  
Optimizing Code_Saturne computations on Petascale systems, Fournier, Y and Bonelle, J and Moulinec, C and Shang, Z and Sunderland, AG and Uribe, JC, Computers & Fluids, Vol. 45, pp. 103108, (2011)  
A robust kepv2/k elliptic blending turbulence model for nearwall, wake, separated and buoyant flows, Flavien Billard and Dominique Laurence, International Journal of Heat and Fluid Flow (Accepted 20111102, 1st Submitted 20110114), (2011)  
Applications of advanced Reynolds Stress transport models to highly separated flows, Billard F, Revell A and Craft T, TSFP7  Ottawa, (2011)  
Large eddy simulation of the flow around single and two sidebyside cylinders at subcritical Reynolds numbers, I. Afgan, Y. Kahil, S. Benhamadouche and P. Sagaut, Physics of Fluids, Vol. 23, pp. 075101, (2011)  
A hybrid numerical scheme for a new formulation of delayed detachededdy simulation (DDES) based on elliptic relaxation, N. Ashton, A. Revell, R. Prosser, Journal of Physics: Conference Series, 13th European Turbulence Conference, Vol. 318, (2011)  
Methane Diffusion Flame Dynamics at Elevated Pressures, H. Gohari Darabkhani and Y. Zhang, Journal of Combustion Science and Technology (CST), Vol. 182 (3), pp. 231251, (2010)  
Dépôt d'aérosols dans une conduite coudée à 90°, Y. Kahil, D. Laurence et A. S. Berrouk, Editions Universitaires Européennes ISBN: 9786131523595, (2010)  
Towards a DFSEM (abstract), R. Poletto, A. Revell, T. Craft, N. Jarrin, TSFP, (2010)  
Numerical Simulation of WaveStructure Interaction wave energy conversion applications using Eulerian and Lagrangian CFD Methods, Westphalen J. Greaves D M. Hu Z Z, Omidvar P. Causon D M, Accepted for the 3rd International Conference and Exhibition on Ocean energy, Spain., (2010)  
TWOTIMESCALE TURBULENCE MODELS FOR NONEQUILIBRIUM FLOWS, T. Klein, T. Craft and H. Iacovides, ETMM8, (2010)  
Computation of fluid forces acting on an infinite cylinder submitted to a single phase cross flow, A. Adobes, F. Jusserand, S. Benhamadouche, Y. Kahil and S. Belouah, 7th International Symposium on FluidStructure Interactions, FlowSound Interactions, and FlowInduced Vibration & Noise, Montreal, Québec, Canada, August 14, (2010)  
SPH for a 2D and 3D heaving body using variable mass particle distribution, Omidvar P. Stansby P K. Rogers B D, Proc. of 5th Int. SPHERIC Workshop, Manchester, UK, pp. 282288, (2010)  
Impact of Coflow Air on Buoyant Diffusion Flames Flicker, H. Gohari Darabkhani, Q. Wang and Y. Zhang, journal of Energy Conversion and Management (ECM), Vol. under review, (2010)  
Flow Control using Thermal Bumps in Hypersonic Flows, L.Yang, E.Erdem and K.Kontis, Erdem E., et al., 48th AIAA Aerospace Sciences Meeting and Exhibit, Reno, NV, (2010), (2010)  
The Validation of Code_Saturne for BuoyancyDriven Flows In DifferentiallyHeated Cavities (POSTER), D. Ammour, T. J. Craft, H. Iacovides, PGR 2010. Manchester, UK., (2010)  
Computation of Flow in a 3D Diffuser Using a TwoVelocity Field Hybrid RANS/LES , J. C. Uribe, A. Revell and C. Moulinec, Turbulence and Interactions, Vol. 110, pp. 385391, (2010)  
Wave body interaction in 2D using Smoothed Particle Hydrodynamics (SPH) including variable particle mass, Omidvar P. Stansby P K. Rogers B D., Submitted for publication, (2010)  
Thermalhydraulics and Conjugate Heat Transfer Calculation in a WireWrapped SFR Assembly, C. Péniguel, I. Rupp, S. Rolfo and M. Guillaud, Proceedings of ICAPP ‘10 San Diego, CA, USA, June 1317, 2010 Paper 10174, (2010)  
An improved dissipation rate equation for the v2f model to account for turbulent transport mechanism in a boundary layer, Billard, F. and Laurence, D. and Uribe, J., ETMM8, (2010)  
Fine large eddy simulation of the flow around one and two sidebyside infinite cylinders at subcritical Reynolds numbers, Y. Kahil, S. Benhamadouche and P. Sagaut, V European Conference on Computational Fluid Dynamics, ECCOMAS CFD, Lisbon, Portugal, 14–17 June, (2010)  
LES and Hybrid RANS/LES of turbulent flow in fuel rod bundle in a triangular array, S. Rolfo, J. C. Uribe, D. Laurence, Direct and LargeEddy Simulation VII, pp. 409414, (2010)  
Pressure Effects on Structure and Temperature Field of Laminar Diffusion Flames, H. Gohari Darabkhani and Y. Zhang, Proceedings of 48th AIAA Aerospace Sciences Meeting, Orlando, Florida, 47 Jan 2010, Vol. AIAA2010, pp. 779795, (2010)  
Stochastic Simulation of the Uplift process for the Irish Electricity Market, M. Jablonska, A. Mayrhofer, J. P. Gleeson, MathematicsinIndustry Case Studies, Vol. 2, (2010)  
Suppression Dynamics of a Laminar Oscillating Diffusion Flame with Coflow Air, H. Gohari Darabkhani and Y. Zhang, Accepted for publication in the Proceedings of the World Congress of Engineering (ICME 2010), (2010)  
Numerical Simulation of Wave Energy Converters using Eulerian and Lagrangian CFD Methods, Westphalen J, Greaves D M, HuntRaby R, Williams C K, Taylor P H, Hu Z Z, Omidvar P, Causon D M, Mingham C G, Stansby P K, Rogers B D, Accepted for the 20th International Society of Offshore and Polar Engineers Conference, Beijing China, (2010)  
Development of a Twovelocities Hybrid RANSLES Model and its Application to a Trailing Edge Flow, J. Uribe, N. Jarrin, R. Prosser, D. Laurence, Journal of Flow Turbulence and Combustion (DOI: 10.1007/s1049401092636), Vol. 85, pp. 181  197, (2010)  
LES and URANS Computations of Buoyancydriven Flows Inside Differentially Heated Cavities (POSTER), D. Ammour, T. J. Craft, H. Iacovides, Annual Code_Saturne Meeting, (2010)  
The investigation of buoyant flows in differentially heated cavities, D. Cooper, T.J. Craft, K. Esteifi, H. Iacovides and A. Omranian, Turbulence Heat and Mass Transfer 6, Rome, (2009)  
Study of NonPlasma and Plasma Jets in Transverse Hypersonic Cross Flow, Erdem E., et al., CEAS 2009 European Air and Space Conference, (2009)  
Prediction of Flow and Heat Transfer Through Stationary and Rotating Ribbed Ducts Using A Nonlinear kε Model. , .M. Raisee, H. Naeimi, M. Alizadeh and H. Iacovides, Flow, Turbulence and Combustion, Vol. 82, pp. 121153, (2009)  
Extreme Wave Loading on Offshore Wave Energy Devices using CFD: a Hierarchical Team Approach, Westphalen J, Greaves D M, Williams C K, Taylor P H, Causon D M, Mingham C G, Hu Z Z, Stansby P K, Rogers B D, Omidvar P, 8th European Wave and Tidal Energy Conference, (2009)  
Computation of ﬂow around a naca 0015 aerofoil with znmf jet control: Potential savings of an unstructured mesh?, J. Uribe, A. Revell, C. Moulinec, V. Kitsios, A. Ooi, and J. Soria., 6th International Symposium on Turbulence and Shear Flow Phenomena., Seoul, Korea, (2009)  
Drag Reduction by Energy Deposition in Hypersonic Flows Reference, Erdem et al., 16th AIAA/DLR/DGLR International Space Planes and Hypersonic Systems and Technologies Conference, (2009)  
A_Stabilised_Incompressible_SPH_Based_on_the_Projection_Method.pdf, R. Xu, P. Stansby, D. Laurence, 4th international SPHERIC workshop, Nantes, France, (2009)  
Accuracy and Stability in Incompressible SPH (ISPH) Based on the Projection Method and A New Approach, R. Xu, P. Stansby, D. Laurence, Journal of Computational Physics, (2009)  
Numerical predictions for transverse injection flows, Erdem E., et al., , 27th International Symposium on Shock Waves, St.Petersburg, Russia, (2009)  
Reconstruction of Turbulent Fluctuations for Hybrid RANSLES simulations using a synthetic Eddy Method, N. Jarrin, R. Prosser, J. Uribe, S. Benhamadouche, D. Laurence, Int. Journal of Heat and Fluid Flow, Vol. 30, pp. 435442, (2009)  
THE COMPUTATION OF BUOYANT FLOWS IN DIFFERENTIALLY HEATED VERTICAL AND INCLINED CAVITIES, Tim J Craft, Hector Iacovides, Ali Omranian, The Sixth International Symposium on Turbulence and Shear Flow Phenomena June 2224, 2009 Seoul National University, Seoul, Korea, (2009)  
Flow Physics and Acoustic Analysis of a Generic Mirror at a High Reynolds Number, Afgan, I., Guleren, K. M. and Laurence, D., International Bhurban Conference on Applied Sciences & Technology (IBCAST), Islamabad. Accepted for 58 Jan 2009, (2009)  
Methane Diffusion Flame Dynamics at Elevated Pressures, Hamidreza Gohari Darabkhani and Yang Zhang, PGRMACE09, Vol. 1, pp. 1213, (2009)  
Investigation of surface waves interacting with a fixed cylinder and generated by a heaving cylinder using Smoothed Particle Hydrodynamics (SPH), Omidvar P. Stansby P K. Rogers B D, Proc. of 33rd IAHR Congress: Water Engineering for Sustainable Environment, Vancouver Canada, pp. 74477454, (2009)  
Developing a Petaflop Computational Fluid Dynamics Capability for Energy and Environment, Moulinec, C., Sunderland, A. G., Emerson, D., Gu, X., Fournier, Y., Uribe, J. C., International conference on parallel, distributed and grid computing for engineering, (2009)  
The application of laminar kinetic energy to laminarturbulent transition prediction, C. Turner and R. Prosser, 6th Turbulence, Heat and Mass Transfer conference, Rome, Italy, (2009)  
SPH for freesurface flow around a heaving oscillating cylinder using variable particle mass distributions: 2D investigations, Omidvar P. Stansby P K. Rogers B D., Proc. of 4th International SPHERIC Workshop, pp. 347352, (2009)  
Numerical and Experimental Investigation of Transverse Injection Flows, Erinc Erdem, Konstantinos Kontis, Journal of Shock Waves (in press), (2009)  
THE COMPUTATION OF BUOYANT FLOWS IN DIFFERENTIALLY HEATED INCLINED CAVITIES, T.J. Craft, H. Iacovides and A. Omranian, UK Heat Transfer Conference 2009, London, (2009)  
Three Dimensional Conjugated Heat Transfer Analysis in Sodium Fast Reactor WireWrapped Fuel Assembly, C. Péniguel, I. Rupp, JP. Juhel, S. Rolfo, M. Guillaud, N. Gervais, Proceedings of ICAPP ‘09 Tokyo, Japan, May 1014, 2009 Paper 9311, (2009)  
Effects of Exit Nozzle Diameter on Compressible Vortex Rings Flow Structure, R. Mariani and K. Kontis, 47th AIAA Aerospace Sciences Meeting Including The New Horizons Forum and Aerospace Exposition 5  8 January 2009, Orlando, Florida, Vol. AIAA 2009410, pp. 15, (2009)  
Heat and fluid flow simulations for deciding tomorrow's energies, JP. Chabard, D. Laurence, (THMT6), Turbulence, Heat and Mass Transfer 6, 1418 September 2009, Rome., (2009)  
Fuel effects on Diffusion Flames at Elevated Pressures, H. Gohari Darabkhani, J. Bassi, H. W. Huang and Y. Zhang, Journal of Fuel, Vol. 88 (2), pp. 264271, (2009)  
NonPlasma and Plasma Transverse Jets in Hypersonic Cross Flow, Erdem et al., 16th AIAA/DLR/DGLR International Space Planes and Hypersonic Systems and Technologies Conference, (2009)  
Impact of Pressure and Fuel Flow Rate on Flame Dynamics in a High Pressure Combustor, H. Gohari Darabkhani and Y. Zhang, Proceeding of CEAS 2009 European Air and Space Conference, 2629 October 2009, Manchester, UK, Vol. Conference DVD, pp. Day2  Propulsion Session, (2009)  
Impact of Pressure on Diffusion Flame Structure (poster presentation), H. Gohari Darabkhani and Y. Zhang, PGRMACE09 Conference, The University of Manchester, Vol. 1, pp. 75, (2009)  
Diffusion flame dynamics under elevated pressures, J. Bassi, H. G. Darabkhani, H. W. Huang and Y. Zhang, 32nd International Symposium on Combustion, (2008)  
Laminarization of Internal Flows under the Combined Effect of Strong Curvature and Rotation, Guleren, K. M., Afgan, I. and Turan, A., ASME Journal of Fluids Engineering, Vol. Vol 130, (2008)  
Heavy particle dispersion from a point source in turbulent pipe flow, A. S. Berrouk, D. E. Stock, D. Laurence, J. J. Riley, International Journal of Multiphase Flow, (2008)  
The Computation of Buoyant Flows in Differentially Heated Cavities, Omranian A, Iacovides H, European Fluid Mechanics Conference, Manchester, Sept 2008, (2008)  
Numerical investigation of the flow field inside a conical rocket nozzle in the presence of transverse injection, Erdem E., et al., 46th AIAA Aerospace Sciences Meeting and Exhibit, Reno, NV, (2008)  
Optimal unstructured meshing for large eddy simulations, Y. Addad, U. Gaitonde, D. Laurence, S. Rolfo, ERCOFTAC Series, Springer, Quality and Reliability of LargeEddy Simulations. Meyers, Geurts & Sagaut, (Eds.), Vol. 12, pp. 93103, (2008)  
Wave loading on a partially and halfsubmerged circular cylinder using SPH, Omidvar P. Rogers B D.Stansby P K, 4th Young Coastal Scientist and Engineering Conference, Oxford UK., (2008)  
LES and RANS of Natural Convection in a NearlyHorizontal Shallow Cavity, Addad Y., Mahmoodilari K. and Laurence D., ICHMT Int. Symp. on Advances in Computational Heat Transfer, Vol. CHT08343, (2008)  
Comparisons of weakly compressible and truly incompressible algorithms for the SPH mesh free particle method, E.S. Lee, C. Moulinec, R. Xu, D. Violeau, D. Laurence and P. Stansby, Journal of Computational Physics, Available online 19 June 2008. doi:10.1016/j.jcp.2008.06.005, (2008)  
Investigation of wave loading on a partially submerged cylinder using SPH, Omidvar P. Rogers B D.Stansby P K., Proc. of 3rd Int. SPHERIC Workshop, Lausanne. Switzerland, pp. 245248, (2008)  
Experimental and Numerical Studies of Inline Tube Bundles (POSTER), D. Ammour, L. Adjlout, T. Yahiaoui, Code_Saturne User's Meeting. EDF. Paris, FRANCE, (2008)  
Modelling of threedimensional jet array impingement and heat transfer on a concave surface, T.J. Craft, H. Iacovides, N.A. Mostafa, Int. J. Heat and Fluid Flow, Vol. 29, pp. 687702, (2008)  
Orthogonal blade vortex interaction on a Helicopter tail rotor, Filippone, A., Afgan, I., AIAA Journal, Vol. 46, pp. 147689, (2008)  
A new formulation of the %$\overline{v^2}f$% model using elliptic blending and its application to heat transfer prediction, Billard, F. Uribe, J.C. and Laurence, D., Proc. of 7th Int. Symp. on Engineering Turbulence Modelling and Measurements, pp. 8994, (2008)  
Simulations of vortex spindown and TaylorGreen Vortices with Incompressible SPH method, R. Xu, C. Moulinec, P. K. Stansby, B. D. Rogers, D. Laurence, ERCOFTAC SIG SPHERIC III international workshop, (2008)  
Numerical modelling of flow and heat transfer from an array of jets impinging onto a concave surface under stationary and rotating conditions, T.J. Craft, H. Iacovides, N.A.Mostafa, Paper GT200850624, Proc. ASME Turbo Expo 2008: Power for Land, Sea and Air, Berlin, (2008)  
Application of the FiniteVolume Method to FluidStructure Interaction Analysis, Craft T J, Iacovides H, Yates M.N, European Fluid Mechanics Conference, 2008, Manchester, Sept 2008, (2008)  
ANALYSIS OF THE FLOW DYNAMICS OF COMPRESSIBLE VORTEX RINGS USING COMPRESSIBLE GASES, R. Mariani K. Kontis, Proc. ‘The 6th European Symposium on Aerothermodynamics for Space Vehicles’, Versailles, France, 3–6 November 2008 (ESA SP659, January 2009), pp. 6, (2008)  
On the use of highorder finite difference schemes on overset grids for LES in aeroacoustics, F. Daude, T. Emmert, P. Lafon, F. Crouzet, C. Bailly, 7th International ERCOFTAC Symposium on Engineering Turbulence Modelling and Measurements (ETMM7), Limassol, Chyprus, 46 June, (2008)  
Stochastic modelling of aerosol deposition for LES of 90° bend turbulent flow, A. S. Berrouk, D. Laurence, International Journal of Heat and Fluid Flow, Vol. 29, pp. 10101028, (2008)  
Some swirlingflow challenges for turbulent CFD, T.J. Craft, H. Iacovides, B.E. Launder, A. Zacharos, Flow Turbulence and Combustion, Vol. 80, pp. 419434, (2008)  
Modelling tsunami overtopping of a sea defence by shallowwater Boussinesq, VOF and SPH methods , P. K. Stansby, R. Xu, B. D. Rogers, et al., Flood Risk Assessment Conference, (2008)  
The computation of unsteady turbulent flow structures in rotating cavities , . Iacovides H, Launder B E, Zacharos A, European Fluid Mechanics Conference, Manchester, Sept 2008, (2008)  
Diffusion flame dynamics at elevated pressures, J. Bassi, H. Gohari Darabkhani, H. W. Huang and Y. Zhang, 32nd International Symposium on Combustion, Montreal, Canada, Vol. 1, pp. 82, (2008)  
Synthetic Inflow boundary conditions for wall bounded flows, N. Jarrin, J. C. Uribe, R. Prosser and D. Laurence, Notes on Numerical fluid mechanics and multidisciplinary design, Advances in Hybrid RANSLES models (S.H. Peng and W. Haase eds.), Vol. 97, pp. 7786, (2008)  
LES Predictions for the NASA LowSpeed Centrifugal Compressor Impeller, Guleren, K. M., Afgan, I. and Turan, A., ASME Journal of Turbomachinery, Vol. TURBO071087, pp. In Press, (2008)  
Modelling the Effect of Flow Pulsation on Turbulent Flow in A 10o Plane Diffuser, . Craft T J, Iacovides H, Momeni P, European Fluid Mechanics Conference, Manchester, Sept 2008, (2008)  
Towards Petascale Computing with Parallel CFD codes, A.G. Sunderland, M. Ashworth, N. Li, C. Moulinec, Y. Fournier and J. Uribe, Parallel CFD 2008, May 1922, 2008, Lyon, France, (2008)  
Numerical Simulation of Generic Side Mirror of Car using Large Eddy Simulation with Polyhedral Meshes, Afgan, I., Moulinec, C., Laurence, D., International Journal for Numerical Methods in Fluids, Vol. 57, (2008)  
Some swirlingflow challenges for turbulent CFD, T.J. Craft, H. Iacovides, B.E. Launder, A. Zacharos, Proc. of CHT08, ICHMT Int. Symp. on Advances in Computational Heat Transfer, Marrakech, Morocco, (2008)  
An OversetGrid Strategy for Aeroacoustics and Aeroelasticity of Moving Bodies, F. Daude, P. Lafon, F. Crouzet, C. Bailly, FluidStructure Interaction. Theory, Numerics, Applications, pp. 283294, (2008)  
Experimental Investigation on Sooty Flames at Elevated Pressures, H. Gohari Darabkhani, Y. Zhang, PGRMACE08 Conference, The University of Manchester, Vol. 1, pp. 22, (2008)  
A highorder algorithm for compressible LES in CAA applications, F. Daude, T. Emmert, P. Lafon, F. Crouzet, C. Bailly, 14th AIAA/CEAS Aeroacoustics Conference, Vancouver, Canada, AIAA Paper 20083049, (2008)  
Stochastic modeling of fluid velocity seen by heavy particles for twophase LES of nonhomogeneous and anisotropic turbulent flows , Berrouk AS, Laurence D, Riley JJ, et al., JOURNAL OF TURBULENCE, Vol. 8 Issue 50, pp. 120., (2007 )  
Stochastic modeling of fluid velocity seen by heavy particles for twophase LES of nonhomogeneous and anisotropic turbulent flows , Berrouk AS, Laurence D, Riley JJ, et al., ERCOFTAC SERIES, Euromech Colloquium 477: ParticleLaden Flow, JUN 2123, 2006 Univ Twente, Enschede, NETHERLANDS, Vol. 11, pp. 179192, (2007 )  
CONVECTIVE HEAT TRANSFER IN PULSED SEPARATED FLOWS , T.J. Craft, H. Iacovides, P. Momeni*, UK Heat transfer conference September Edinburgh, (2007)  
Wave overtopping from focussed wave groups: experiments and modelling, Stansby, P.K., Hunt, A.C., Xu, R., Taylor, P.H., Borthwick, A.G.L., Feng, T., Laurence, D.R., Flood Risk Assessment Conference, (2007)  
Advanced Turbulence modelling of wingtip vortices, Revell A, Duraisamy K, Iaccarino G, Turbulence and Shear Flow Phenomena TSPF5, Munich. Germany. 27 August 2007, (2007)  
On the effects of Lifted Wavelets for Combustion Simulations, Prosser, R., Proceedings of the Institution of Mechanical Engineers  Part C: Journal of Mechanical Engineering Science, Vol. 221, pp. 15791596, (2007)  
TwoDimensional Prediction of Unsteady Turbulent Flow around a Square Cylinder Confined in a Channel, M. Raisee, A Jafari and H. Iacovides, IUTAM Symposium on Unsteady Separated Flows and their Control, 1822 June 2007, Corfu, Greece, (2007)  
Towards Improved Boundary Conditions for the DNS and LES Turbulent Subsonic Flows, Prosser, R., Journal of Computational Physics, Vol. 222, pp. 469474, (2007)  
3D Prediction of Flow and Heat Transfer through Ribbed Ducts of Square CrossSection Using a Cubic Nonlinear LowReynolds Number kε Model, M Raisee, Naieme and H. Iacovides, TSFP7. 7th International Symposium on Turbulence and Shear Flow Phenomena, Munich, August 2007, (2007)  
Modelling the effect of forced unsteadiness on flow and heat transfer in separated and reattaching flows, T.J. Craft, H. Iacovides, P. Momeni, Proc. 5th Int. Symp. on Turbulence and Shear Flow Phenomena, Munich, (2007)  
Modelling of threedimensional jet impingement cooling on a concave surface, T.J. Craft, H. Iacovides, N.A. Mostafa, Proc. 7th European Conference on Turbomachinery Fluid Dynamics and Thermodynamics, Athens, (2007)  
Numerical Simulation Across InLine Tube Bundle Using The URANS Approach., D. Ammour, Y, Addad, L. Adjlout, 13th International Conference on Applied Mechanics and Mechanical Engineering AMME13. Ministry of Defense Military Technical College Kobry Elkobbah. Cairo, EGYPT., (2007)  
Turbulence modelling of Strongly Detached Unsteady Flows: The Circular Cylinder, Revell A, Craft T J, Laurence D R P., Second Symposium on Hybrid RANSLES Methods, Corfu, Greece.. 17 June 2007, (2007)  
MODELLING FLOW AND HEAT TRANSFER IN SEPARATED AND REATTACHING FLOWS , T. J. Craft, H. Iacovides, P. Momeni*, Graduate Research conference June, Manchester, (2007)  
On the use of embedded meshes in the LES for external flows, Y. Addad, R. Prosser, D. Laurence, S. Moreau, and F. Mendonca, J. Flow Turbulence and combustion, (2007)  
An adaptive algorithm for compressible reacting flows using interpolating wavelets, Prosser, R., Proceedings of the Institution of Mechanical Engineers  Part C: Journal of Mechanical Engineering Science, Vol. 221, pp. 13971410, (2007)  
Computational investigation of flow through a rotating square duct by means of advanced secondmoment closure, A. Boudjir, T.J. Craft, A. Turan, Flow Turbulence and Combustion, Vol. 79, pp. 99122, (2007)  
Using advanced wall functions in the computation of buoyant Flows, S. A Omranian, H. Iacovides, ans B. P. Axcell, UK Heat Transfer 2007 Proceeding, Edinburgh, (2007)  
Two Velocities hybrid RANSLES of a trailing edge flow, Uribe, J. C., Jarrin, N., Prosser, R. and Laurence, D., IUTAM Symposium "Unsteady Separated Flows and their Control"  Corfu Greece June 2007, Vol. 14, pp. 6376, (2007)  
LES of turbulent flow for wall mounted cantilever cylinders of aspect ratio 6 and 10., Afgan I., Moulinec C., Prosser R., Laurence D., I. J. Heat & Fluid Flow, Vol. 28, pp. 561574, (2007)  
Flow and heattransfer modelling of threedimensional jet impingement on a concave surface , T.J. Craft, H. Iacovides, N.A. Mostafa, Proc. 5th Int. Symp. on Turbulence and Shear Flow Phenomena, Munich, (2007)  
Computation of convective heat transfer in ribbed passages, H Iacovides and J Pujol, UK Heat Transfer 2007 Edinburgh, (2007)  
Hybrid V2F RANS LES model and synthetic inlet turbulence applied to a trailing edge flow, Uribe, J.C., Jarrin, N., Prosser, R. and Laurence, D., Turbulence and Shear Flow Phenomena 5, Vol. 2, pp. 701706, (2007)  
Internal blade cooling: the Cinderella of C&EFD research in gas turbines, Review Paper, Iacovides H and Launder B.E, Proceedings of the Institution of Mechanical Engineers, Part A, Journal of Power and Energy, Vol. 221, pp. 265 290, (2007)  
Multijet impingment cooling on a concave surface, under stationary and rotating conditions, A Skillen and H. Iacovides, UK Heat Transfer, Edinburgh, (2007)  
Numerical investigation of turbulent natural convection in an inclined square cavity with a hot wavy wall, M. Aounallah, Y. Addad, S. Benhamadouche, O. Imine, L. Adjlout, D. Laurence, Int. J. Heat & Mass Transfer, Vol. 50, pp. 16831693, (2007)  
Development and application of wallfunction treatments for turbulent forced and mixed convection flows, Craft, T.J., Gant, S.E., Gerasimov, A.V., Iacovides, H., Launder, B.E, Fluid Dyn. Res., Vol. 38, pp. 127144, (2006)  
Development of Flowfield and Surface Heattransfer Measurement and Visualisation Techniques for Internal Rotating Cooling Flows in Gas Turbine Blades, H. Iacovides and B. E. Launder, AIAA20063443, Invited paper, 25th AIAA Aerodynamic Measurements Technology & Ground Testing Conference, San Fransisco, (2006)  
Prediction of developing turbulent flow in 90ocurved ducts using linear and nonlinear lowRe kε models, M. Raisee, H. Alemi and H. Iacovides, International Journal for Numerical Methods in Fluids, Vol. 51, pp. 13791405, (2006)  
Turbulent Natural Convection in Horizontal Coaxial Cylindrical Enclosures: LES and RANS Models, Y. Addad, D. Laurence, and M. Rabbitt, Turbulence, Heat and Mass Transfer 5, Dubrovnik, Croatia, (2006)  
Synthetic turbulent inflow conditions based on a vortex method for largeeddy simulation, S. Benhamadouche, N. Jarrin, Y. Addad, D. Laurence, PCFD, Int. Journal, Vol. 6, pp. 5057, (2006)  
The Computation of Flow and Heat Transfer Through an Orthogonally Rotating SquareEnded UBend, Using LowReynoldsNumber Models, KS P. Nikas and H. Iacovides, International Journal for Numerical Methods in Heat and Fluid Flow, Vol. 16, pp. 827 – 844, (2006)  
Advanced RANS modeling of wingtip vortex flows, Revell A, Iaccarino G, Wu X., Proceedings of the 2006 Summer Program, CTR, Stanford. USA.. Editor Moin., pp. 7386, (2006)  
Free Convection in an inclined square cavity with partial partitions on a wavy hot wall, M. Belkadi, M. Aounallah, O. Imine, L. Adjlout, Y. Addad, PCFD, Int. Journal, Vol. 6, pp. 428434, (2006)  
A computational study of the nearfield generation and decay of wingtip vortices, Craft, T.J., Gerasimov, A.V., Launder, B.E., Robinson, C.M.E., Int. J. Heat Fluid Flow, Vol. 27, pp. 684695, (2006)  
Boundary Conditions for Low Mach Number Reacting Flows, Prosser, R., WSEAS Transactions On Fluid Mechanics and Aerodynamics, Vol. 5, pp. 11021107, (2006)  
A stressstrain lag eddy viscosity model for unsteady mean flow, Revell, A.J., Benhamadouche, S., Craft, T.J., Laurence, D.R., Int. J. Heat Fluid Flow, Vol. 27, pp. 821830, (2006)  
A syntheticeddy method for generating inflow conditions for LES, Jarrin, N., Benhamadouche, S., Laurence, D. and Prosser, R., Int. J. Heat and Fluid Flow, Vol. 27, pp. 585593, (2006)  
Parametric study of secondary gas injection into a conical rocket nozzle for thrust vectoring, Erdem E., et al., 42nd AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, Sacramento, CA, (2006)  
Problems, Progress and Paradoxes in Modelling Internal Cooling of Rotating GasTurbine Blades, Iacovides H and Launder B. E, Invited Keynote Lecture, 5th Int. Symp. on Turbulence, Heat and Mass Transfer (THMT06), Dubrovnik, Croatia, (2006)  
Methods used and highlighted results from UMIST. . "FLOMANIA — A European Initiative on Flow Physics Modelling". , Uribe J, Utyuzhnikov S V, Revell A, Gerasimov A, Laurence D R P., Springer. ISBN 9783540287865. 2006, (2006)  
LES of a flow over a vertically mounted cylinder on a flat plate., Afgan I., Moulinec C., Laurence D., CMFF’06, 13th I.C. on Fluid Flow Technologies, Budapest, September 69, 2006, (2006)  
Internal Blade Cooling: the Cinderella of Turbomachinery C&EFD, Launder B. E. and Iacovides H, Keynote Lecture, 12th International Heat Transfer Conference, Sydney, Augus, (2006)  
Contribution to the control of fireinduced smoke flow in longitudinally ventilated tunnels, Galliot S, Revell A, Blay D, Vantelon J P, Deberteix P. 2006, Fire Technology, Vol. 253, pp. 315, (2006)  
An analytical wallfunction for turbulent flows and heat transfer over rough walls, Suga, K., Craft, T.J., Iacovides, H., Int. J. Heat Fluid Flow, Vol. 27, pp. 852866, (2006)  
A stressstrain lag EVM for mean unsteady and nonequilibrium flows, Revell A, Craft T J, Laurence D R P, Code_Saturne User Conference, Paris, France.. November 2006, (2006)  
Near wall behaviour of RANS turbulence models and implications for wall functions, Kalitzin, G., Medic, G., Iaccarino, G and Durbin, P., Journal of Computational Physics, Vol. 204, pp. 265291, (2005)  
Improved Boundary Conditions for the Direct Numerical Simulation of Turbulent Subsonic Flows I: Inviscid Flows, Prosser, R., Journal of Computational Physics, Vol. 207, pp. 736768, (2005)  
%$\overline{v^2}/k  f$% turbulence model and its application to forced and natural convection, Hanjalic, K., Laurence, D., Popovac, M. and Uribe, J. C., Engineering Turbulence Modelling and Experiments 6, pp. 6776, (2005)  
A generalized analytical wall function, Suga, K., Craft, T.J., Iacovides, H., Trans. Japan Society of Mechanical Engineers B, Vol. 71 No. 711(200511), pp. 113121, (2005)  
Large Eddy Simulation of a symmetric bump on structured and unstructured grids, comparisons with RANS and TRANS models., Benhamadouche, S., Uribe, J., Jarrin, N., Laurence, D., Turbulence and Shear Flow Phenomena 4, Vol. 1, pp. 325330, (2005)  
Computation of Flow and Heat Transfer in Abrupt Pipe Expansions using NonLinear EddyViscosity Models of Turbulence, T.J. Craft, H. Iacovides, P. Momeni, 9th UK National Heat Transfer Conference, Manchester, (2005)  
An Analytical WallFunction for Turbulent Rough Wall Heat Transfer, K. Suga, T.J. Craft, H. Iacovides, 4th International Symposium on Turbulence and Shear Flow Phenomena (TSFP4), Williamsburg, Virginia USA, (2005)  
The experimental and numerical investigation of the flow field inside a solid propellant booster in presence of slag accumulation, Erdem E., 3rd Ankara International Aerospace Conference, (2005)  
Large Eddy Simulation of flow across inline tube bundles., Benhamadouche S., Laurence D., Jarrin N., Afgan I., Moulinec C., NURETH11 (Nuclear Reactor ThermalHydraulics), Avignon FR, Oct. 2005, pp. paper 405, (2005)  
Numerical study of turbulent flow in rotorstator cavities, using linear and nonlinear kε models, M. Raisee, A. Saneei and H. Iacovides, 6th European Conference on Turbomachinery, March 2005, Lille, France., (2005)  
Development and implementation of the three equation stressstrain lag turbulence model, Revell A, Craft T J, Laurence D R P., Code_Saturne User Conference, Paris, France. November 2005, (2005)  
Extending an analytical wallfunction for turbulent flows over rough walls, K. Suga, T.J. Craft, H. Iacovides, ETMM6, ERCOFTAC International Symposium on Engineering Turbulence Modelling and Measurements, Sardinia, Italy, (2005)  
Application of a Generalised RANS WallFunction, to Recirculating Flows with Heat Transfer, T.J.Craft, S.E. Gant and H. Iacovides, ICCHMT4, 4th International Conference on Computational Heat and Mass Transfer, Paris, France, May 2005, (2005)  
Investigation of Aerodynamic Profiles, D. Ammour, L. Adjlout, Military School E.M.P, Algiers, ALGERIA, (2005)  
A stressstrain lag eddy viscosity model for unsteady mean flow, Revell A, Benhamadouche S, Craft T J, Laurence D R P, Yaqobi K., Engineering Turbulence Modelling and Experiments 6: ERCOFTAC International Symposium on Engineering Turbulence and Measurements  ETMM6, Sardinia, Italy.. Editor W. Rodi, M. Mulas, eds.. 22 May 2005, (2005)  
Prediction of Developing Turbulent Flow in a 90o curved duct, using linear and nonlinear lowRe kε models., M Raisee, H. Alemi and H Iacovides, Paper ESDA200458466, 7th Biennial ASME Conference on Engineering Design and Analysis, Manchester, UK, (2004)  
Threedimensional simulation of rotorstator cavity flow , Craft, T.J., Gant S.E., Iacovides, H., Launder, B.E. and Serre, E, _CSAR Focus Magazine (http://www.csar.cfs.ac.uk/about/csarfocus/)_, Vol. 31, (2004)  
A robust formulation of the v2f model, Laurence, D. Uribe, J. C. and Utyuzhnikov, S. V., Flow Turbulence and Combustion, Vol. 73, pp. 169185, (2004)  
The negatively buoyant walljet: LES database, Addad Y., Benhamadouche S., and Laurence D., Int. J. Heat fluid Flow, Vol. 25, pp. 795808, (2004)  
Prediction of Convective Heat Transfer Through Ribbed Channels Using a LoweRe NonLinear kε Model. , M Raisee, A Noursadeghi and H. Iacovides, Int. Journal for Numerical Methods in Heat and Fluid Flow, Vol. 14, pp. 285304, (2004)  
The negatively buoyant turbulent wall jet: performance of alternative options in RANS modelling, Craft, T.J., Gerasimov, A.V., Iacovides, H., Kidger, J.W., Launder, B.E., Int. J. Heat and Fluid Flow, Vol. 25, pp. 809823, (2004)  
A new wall function strategy for complex turbulent flows, Craft, T.J., Gant, S.E., Iacovides, H., Launder, B.E., Numerical Heat Transfer, Vol. 45, pp. 301318, (2004)  
NUMERICAL STUDY ON MIXED CONVECTION AND THERMAL STREAKING IN POWER TRANSFORMER WINDINGS, E. J. Kranenborg, C. O. Olsson etc, CIGRE A2.38 Thermal Modelling, (2004)  
The Computation of flow and heat transfer through squareended Ubends, using LowReynoldsnumber models., KP S Nikas and H Iacovides, Int. Journal for Numerical Methods in Heat and Fluid Flow, Vol. 14, pp. 305324, (2004)  
Turbulent Flow and Heat Transfer in Stationary and Rotating Cooling Passages with Inclined Ribs on Opposite Walls, H. Iacovides and M. Raisee, ., ASME/IGTI International GasTurbine and Aero Congress, Vienna, (2004)  
THERMAL PERFORMANCE OF POWER TRANSFORMERS: THERMAL CALCULATION TOOLS FOCUSED ON NEW OPERATING REQUIREMENTS, A. TANGUY, J.P. PATELLI etc, CIGRE A2.38 Thermal Modelling, (2004)  
The negatively buoyant turbulent wall jet: performance of alternative options in RANS modelling, Craft, T.J., Gerasimov, A.V., Iacovides, H., Kidger, J.W., Launder, B.E, Proc. 4th Int. Symp. on Turbulence, Heat and Mass Transfer, Antalya, Turkey, (2003)  
Synthetic turbulence inflow conditions for largeeddy simulation, Jarrin N., Benhamadouche S., Addad Y., Laurence D., 4th Int. Symposium on THMT, Turkey, (2003)  
On the Effects of inclines Ribs on the Flow and Thermal Development in Straight Cooling Passages; An Experimental and Computational Study, H. Iacovides, G. Kelemenis and M. Raisee, Journal of.Expt Thermal and Fluid Science, Vol. 27, pp. 283294, (2003)  
Comparison of EVM and DSM in Flow and Heat Transfer of Turbine Blades Internal Cooling Passages with a Wall Function Method, Y. Okita, and H. Iacovides, ASME Journal of Turbomachinery, Vol. 125, pp. 585597, (2003)  
Application of a New WallFunction Strategy to Turbulent Mixed and Natural Convection in Vertical Flows, T.J. Craft, A. V. Gerasimov, H. Iacovides and B. E. Launder, UK National Heat Transfer Conference, Oxford, (2003)  
A new wallfunction strategy applied to mixed convection in vertical annular passages, Craft, T.J., Gerasimov, A.V., Iacovides, H., Launder, B.E., Proc. Conference on Modelling Fluid Flow, The 12th International Conference on Fluid Flow Technologies, Budapest, Hungary, (2003)  
Twotimescale turbulence modelling of a fullypulsed axisymmetric air jet, Bremhorst, K., Craft, T.J., Launder, B.E., Proc. 3rd Int. Symposium on Turbulent Shear Flow Phenomena, Sendai, Japan, (2003)  
The negatively buoyant walljet: LES database, Addad Y., Benhamadouche S., and Laurence D., 4th Int. Symposium on THMT, Turkey, 1217 October, (2003)  
LargeEddy Simulation of a forwardbackward facing step for acoustic source identification, Addad Y., Laurence D., Talotte C., Jacob M. C., Int. J. of Heat and Fluid Flow, (2003)  
Precessing vortex structures in Flow within rotorstator disc cavities: DNS and visualization studies., E. Serre, O. Grazny, H. Iacovides, P Bontoux and B E. Launder, Proc of Ninth European Turbulence Conference, Southampton, (2002)  
Large eddy simulation of an Ahmed reference model, Howard, R. J. A. and Pourquie, M., Journal of Turbulence, Vol. 3 (12), pp. 118, (2002)  
A linearised turbulent production in the kepsilon model., Guimet V., Laurence D., 5th Engineering Turbulence Modelling and Measurements. Mallorca, Spain. 1618th September 2002, W. Rodi & N. Fueyo Editors, Elsevier., (2002)  
Progress in the generalization of wallfunction treatments, Craft, T.J., Gerasimov, A.V., Iacovides, H., Launder, B.E, Int. J. Heat Fluid Flow, Vol. 23, pp. 148160, (2002)  
Comparison of Large Eddy Simulation and experimental results of the flow around a forwardbackward facing step, Talotte C., Addad Y., Laurence D., Jacob M. C., Giardi H., ASME Fluids Engineering Division Summer Meeting, Canada, Quebec, July 1418, (2002)  
The Computation of flow and heat transfer through an orthogonally rotating squareended Ubend, using lowReynoldsnumber models, K.S..P. Nikas and H. Iacovides, 5th International Symposium on Engineering Turbulence Modelling and Measurements, Majorca, Spain, (2002)  
Precessing Vortex Structures in Turbulent Flow within RotorStator Disc Cavities, O. Grazny, H. Iacovides and B. E. Launder, Flow, Turbulence and Combustion, Vol. 69, pp. 5161, (2002)  
Computation of Flow and Heat Transfer in TwoDimensional RibRoughened Passages, using lowReynoldsnumber turbulence models, Iacovides H and Raisee M, Int J. Numerical Methods Heat and Fluid Flow, Vol. 11, pp. 138155, (2001)  
Principles and performance of TCLbased secondmoment closures, Craft, T.J., Launder, B.E., Flow Turbulence & Combustion, Vol. 66, pp. 355372, (2001)  
Comparison of EVM and DSM in Flow and Heat Transfer of Turbine Blades Internal Cooling Passages with a Wall Function Method, Y. Okita, H. Kodama, S. Yamawaki and H. Iacovides, ECCOMAS CFD 2001 Conference, Swansea, (2001)  
Dynamic and thermal measurements of flow in a rotating Ubend with 45o ribs, Iacovides H., Jackson D. C., Kelemenis G. and Launder B. E and YM Yuan, Int J. of Heat and Fluid Flow, Vol. 22, pp. 308314, (2001)  
Reynoldsstress modeling of afterbody flows, Batten, P., Craft, T.J., Leschziner, M.A., The Aeronautical Journal, Vol. 105, pp. 297306, (2001)  
The computation of flow and heat transfer through squareended Ubends, using lowReynoldsnumber models, H. Iacovides and K. S. P. Nikas, 2nd Int. Symp. On Turbulent Shear Flow Phenomena, Stockholm, Sweden, (2001)  
On the Effects of inclines Ribs on the Flow and Thermal Development in Straight Cooling Passages; An Experimental and Computational Study, H. Iacovides, G. Kelemenis and M. Raisee, 4th European Conference in Turbomachinery, Florence, Italy, (2001)  
On the spreading mechanism of the threedimensional turbulent wall jet, Craft, T.J., Launder, B.E., J. Fluid Mech., Vol. 435, pp. 305326, (2001)  
Vortical TimeDependent Flow Structures in Flow within a RotorStator Disc Cavity, O. Czarny, H. Iacovides, D.C. Jackson and B.E. Launder, Euromech Colloquium 426, Swirling Flows, Trondheim, Norway, (2001)  
On modelling periodic motion with turbulence closures, Cotton, M.A., Craft, T.J., Guy, A.W., Launder, B.E., Flow Turbulence & Combustion, Vol. 67, pp. 143158, (2001)  
The measurement of local wall heat transfer in stationary Uducts of strong curvature, with smooth and rib roughened walls, H. Iacovides, D. C. Jackson, G. Kelemenis, and B. E. Launder, ASME Journal of Turbomachinery, Vol. 122, pp. 386392, (2000)  
The application of wavelets to reacting flows, Prosser, R. and Cant, R.S., Proceedings of the Institution of Mechanical Engineers  Part C: Journal of Mechanical Engineering Science, Vol. 214, pp. 13551362, (2000)  
Computation of axisymmetric rotorstator flows related to cooling passages of electrical generators, H Iacovides, M A Leschziner and HY Li, NAFEMS International Journal of CFD Case Studies, Vol. 2, pp. 317, (2000)  
Turbulent, constanttemperature, planechannel flow, P.G. Tucker and H. Iacovides, 1st NAFEMS Workbook of CFD Examples, Chapter 3, Edited by P.G. Tucker, (2000)  
Secondmoment modelling of developing and selfsimilar threedimensional turbulent freesurface jets, Craft, T.J., Kidger, J.W., Launder, B.E, Int. J. Heat Fluid Flow, Vol. 21, pp. 338344, (2000)  
Simulation and Modelling of a skewed turbulent channel flow, Howard, R.J.A. and Sandham, N.D., Flow Turbulence and Combustion, Vol. 65, pp. 83109, (2000)  
Dynamic and thermal measurements of flow in a rotating Ubend with 45deg ribs, . Iacovides H., Jackson D. C., Kelemenis G. and Launder B. E, 3rd International Conference on Turbulence, Heat and Mass Transfer, Nagoya, Japan, (2000)  
The theoretical development of wavelets in reacting flows, Prosser, R. and Cant, R.S., Proceedings of the Institution of Mechanical Engineers  Part C: Journal of Mechanical Engineering Science, Vol. 214, pp. 13631373, (2000)  
Comparison of nearwall behaviour and its effect on heat transfer for k and k turbulence models in ribroughened 2D channels, J. Brendberg, L. Davidson and H. Iacovides, 3rd International Conference on Turbulence, Heat and Mass Transfer, Nagoya, Japan, (2000)  
A novel open flow microflow sensor for reduced fouling of chemical , C.M. Gregory, J.V. Hatfield, S. Higgins, H. Iacovides, P.J. Vadgama, Sensors and Actuators B: Chemical 65 (13), pp. 305309, (2000)  
Onedimensional modelling of foulant reduction in a microflow, amperometricsensor system, S. W. Higgins, C. M. Gregory, J. V. Hatfield, H. Iacovides and P. J. Vadgama, Journal of Medical Engineering and Technology, Vol. 23, pp. 102107, (1999)  
Progress in the use of nonlinear twoequation models in the computation of convective heattransfer in impinging and separated flows, Craft, T.J., Iacovides, H., Yoon, J.H., Flow Turbulence & Combustion, Vol. 63, pp. 5980, (1999)  
Reynoldsstresstransport modeling for compressible aerodynamics applications, Batten, P., Craft, T.J., Leschziner, M.A., Loyau, H., AIAA Journal, Vol. 37, pp. 785796, (1999)  
Twoequation turbulence modelling of a transitional separation bubble, Howard, R. J. A., Alam, M. and Sandham, N. D., Flow Turbulence and Combustion, Vol. 63, pp. 175191, (1999)  
The Numerical Computation of Turbulent Convective Heat Transfer, H Iacovides, Invited Keynote Paper, 6th UK National Conference on Heat Transfer, September 1999, HeriotWatt University, Edinburgh., (1999)  
The measurement of local wall heat transfer in stationary Uducts of strong curvature, with smooth and rib roughened walls, H. Iacovides, D. C. Jackson, G. Kelemenis, and B. E. Launder, Int. GasTurb and Aero Congress, Indianapolis, USA, (1999)  
The computation of turbulent flow through stationary and rotating Ubends with ribroughened surfaces, H. Iacovides, International Journal for Numerical Methods in Fluids, Vol. 29, pp. 865876, (1999)  
The measurement of local wall heat transfer in Uducts of strong curvature, with smooth and rib roughened walls., H. Iacovides, D.C. Jackson, G. Kelemenis, and B.E. Launder, Engineering Turbulence Modelling and Experiments 4, Corsica, France, Ed W Rodi and D Laurence, ELSEVIER, (1999)  
Recent progress in the computation of flow and heat transfer in internal cooling passages of turbine blades, H. Iacovides and M Raisee, International Journal of Heat and Fluid Flow, Vol. 20, pp. 320328, (1999)  
Experiments on local heat transfer in a rotating squareended Ubend., . H. Iacovides, D. C. Jackson G. Kelemenis B. E. Launder and YM Yuan., International Journal of Heat and Fluid Flow, Vol. 20, pp. 302310, (1999)  
A novel openflow microflow sensor for reduced fouling of chemical sensors in physiological sampling environment., Gregory C, Higgins S, Hatfield J, Iacovides H and Vadgama P J, Technical Digest Seventh international meeting on Chemical Sensors, IMCS7, 580582, Beijing, China, (1999)  
An experimental study of a ribroughened rotating Ubend flow, H Iacovides, D C Jackson, B E Launder and YM Yuan, Journal of Experimental Thermal and Fluid Science, Vol. 19, pp. 151159, (1999)  
On the use of wavelets in computational combustion, Prosser, R. and Cant, R.S., Journal of Computational Physics, Vol. 147, pp. 337  361, (1998)  
LDA study of flow development through an orthogonally rotating UBend of strong curvature and ribroughened walls, Iacovides H, Jackson D C, Ji H, Kelemenis G, Launder B E and Nikas K, ASME Journal of Turbomachinery, Vol. 108, pp. 386391, (1998)  
Recent progress in the computation of flow and heat transfer in internal cooling passages of turbine blades, H. Iacovides and M Raisee, 2nd EF Conference on Turbulent Heat Transfer, Manchester, UK, (1998)  
Application of Turbulence Models in the Simulation of Complex Flows with Forced , H. Iacovides, Invited Paper, ECOMAS98, Athens, Greece, Sept., (1998)  
Developments in a lowReynoldsnumber secondmoment closure and its application to separating and reattaching flows, Craft, T.J., Int. J. Heat Fluid Flow, Vol. 19, pp. 541548, (1998)  
Computation of flow and heat transfer through rotating ribbed passage, H Iacovides, International Journal of Heat and Fluid Flow, Vol. 19, pp. 393400, (1998)  
Recent progress in the experimental investigation of flow and local wall heat transfer in internal cooling passages of gasturbine blades, H. Iacovides, D.C. Jackson, G. Kelemenis, B.E. Launder and YM Yuan, 2nd EF Conference on Turbulent Heat Transfer, Manchester, UK, (1998)  
Prediction of turbulent transitional phenomena with a nonlinear eddyviscosity model, Craft, T.J., Launder, B.E., Suga, K., Int. J. Heat Fluid Flow, Vol. 18, pp. 1528, (1997)  
Development and application of a cubic eddyviscosity model of turbulence, Craft, T.J., Launder, B.E., Suga, K., Int. J. Heat and Fluid Flow, Vol. 17, pp. 108115, (1996)  
Recent developments in secondmoment closure for buoyancyaffected flows, Craft, T.J., Ince, N.Z., Launder, B.E., Dynamics of Atmospheres and Oceans, Vol. 23, pp. 99114, (1996)  
A Reynolds stress closure designed for complex geometries, Craft, T.J., Launder, B.E., Int. J. Heat Fluid Flow, Vol. 17, pp. 245254, (1996)  
Impinging jet studies for turbulence model assessment. Part II: An examination of the performance of four turbulence models, Craft, T.J., Graham, L.J.W., Launder, B.E., Int. J. Heat Mass Transfer, Vol. 36, pp. 26852697, (1993)  
On the adequacy of the thinshearflow equations for computing turbulent jets in stagnant surroundings, El Baz, A., Craft, T.J., Ince, N.Z., Launder, B.E., Int. J. Heat Fluid Flow, Vol. 14, pp. 164169, (1993)  
New wallreflection model applied to the turbulent impinging jet, Craft, T.J., Launder, B.E, AIAA Journal, Vol. 30, pp. 29702972, (1992)  
Schlieren and Laser Sheet Investigation of Methaneair Coflow Flames, Q. Wang, H. Gohari Darabkhani and Y. Zhang, journal of Experiments in Fluids, Vol. under review, (2010) 
Theses, Dissertations and Technical Reports: Theses, Dissertations and Technical Reports:
Flame turbulence interaction in premixed turbulent combustion, U. Ahmed, PhD Thesis, University of Manchester, (2013)  
Turbulence modelling in the nearfield of an axial flow turbine using Code_Saturne, James McNaughton , PhD Thesis, University of Manchester, (2013)  
Highly Resolved LES and Tests of The Effectiveness of Different URANS Models for The Computation of Challenging Natural Convection Cases, Dalila Ammour, PhD Thesis, The University of Manchester. School of M.A.C.E., (2013)  
Laminar Kinetic Energy Modelling for Improved LaminarTurbulent Transition Prediction, Clare Turner, PhD Thesis, The University of Manchester, (2012)  
Simulation des grandes échelles d'écoulements turbulents autour de cylindres circulaires à un nombre de Reynolds sous critique, Yacine Kahil, PhD Thesis, Institit d'Alembert  Université Pierre et Marie Curie, (2011)  
The computation of turbulent natural convection flows, Ali Omranian, PhD Thesis, The University of Manchester, (2011)  
LES and URANS Computations of BuoyancyDriven Flow Inside 3D Tilted DifferentiallyHeated Cavities and The Horizontal Penetration Cavity., Dalila Ammour, 1st Year PhD Report, School of M.A.C.E. The University of Manchester, (2011)  
CClass Catamaran Wing Performance Optimisation, Nils Haack, MPhil Thesis, The University of Manchester, (2011)  
A robust kepv2/k elliptic blending turbulence model applied to near wall, separated and buoyant flows, Flavien Billard, PhD Thesis, The University of Manchester, (2011)  
Second year report, Ruggero Poletto, Technical Report, University of Manchester, (2011)  
Free surface flow simulation: correcting and benchmarking the ALE method in Code_Saturne, Olivier COZZI, MPhil Thesis, University of Manchester, School of Mechanical, Aerospace and Civil Engineering, (2010)  
LES and URANS Computations of BuoyancyDriven Flow in Vertical and Inclined DifferentiallyHeated Cavities., Dalila Ammour, 1st Year PhD Report, School of M.A.C.E. The University of Manchester, (2010)  
Free surface flow simulation: correcting and benchmarking the ALE method in Code Saturne , Olivier Cozzi, MPhil Thesis, University of Manchester, (2010)  
Turbulence modelling in the nearfield of an axial flow tidal turbine in Code Saturne, James McNaughton , 1st Year PhD Report, University of Manchester, (2010)  
[[CfdTm.ResPub230][]], Roberto Lotto, Technical Report, University of Manchester, (2010)  
Designing Numerical Methods for Next Generation High Performance Computing, Mark Mawson, 1st Year PhD Report, The University of Manchester, (2010)  
First year report, R. Poletto, 1st Year PhD Report, University of Manchester, (2010)  
Turbulence modelling in the nearfield of an axial flow tidal turbine in Code Saturne  1st year report, James McNaughton , 1st Year PhD Report, University of Manchester, (2010)  
Improvement and Tuning of a Reynolds Averaged Navier Stokes Model  2YR, FlavienBillard, Technical Report, The University of Manchester, (2009)  
Laboratory modelling of open channel flow past emergent vegetation, James McNaughton, MSc Dissertation, University of Manchester, (2009)  
The Computation of Turbulent Natural Convection Flows, Ali Omranian, 1st Year PhD Report, The University of Manchester, (2009)  
The Development of Novel Turbulence Modelling Approaches for Complex Industrial Flows, Tania Klein, Technical Report, MACE School, (2009)  
Modelling the Effect of Pulsation on Flow and Heat Transfer in Turbulent Separated and Reattaching Flows, Parham Momeni, PhD Thesis, The University of Manchester, (2008)  
Synthetic Inflow Boundary Conditions for the Numerical Simulation of Turbulence, Nicolas Jarrin, PhD Thesis, The University of Manchester, (2008)  
"Laminar Kinetic Energy" and its Potential for Improving Transition Prediction, C. Turner, Technical Report, University of Manchester, (2008)  
The Development of Novel Turbulence Modelling Approaches for Complex Industrial Flows, Tania Suaiden Klein, 1st Year PhD Report, School of Mechanical, Aerospace and Civil Engineering  The University of Manchester, (2008)  
Multidisciplinary Investigations on Sooty Flames at Elevated Pressures, Hamidreza Gohari Darabkhani, Technical Report, School of MACE, The University of Manchester, (2008)  
Quality Criteria for Large Eddy Simulation, Ulka Gaitonde, 1st Year PhD Report, University of Manchester, (2008)  
Computational Fluid Dynamics Modelling of ThreeDimensional Jet Impingement Cooling on Concave Surfaces, N.A. Mostafa, PhD Thesis, University of Manchester, (2007)  
CFD study of heat transfer with unstructured codes., S. Rolfo, 1st Year PhD Report, The University of Manchester, (2007)  
Nearwall turbulence modelling and its applications to industrial cases, Flavien Billard, MPhil Thesis, University of Manchester, (2007)  
Numerical Simulation of Turbulent Flow Across InLine Tube Bundles Using URANS Models and the DES Approach. , Dalila Ammour, MSc Dissertation, Univerisity Of U.S.T.ORANMB and The University of Manchester. TEMPUS Joint European Project., (2007)  
Numerical Study of Turbulence Induced Vibrations in Pipe Bends using Computational Fluid Dynamics, Revell A, Zacharos A, Jarrin N, Afgan I, Craft T J., Technical Report, University of Manchester, (2007)  
depot d'aerosol, Yacine Kahil, MSc Dissertation, University of Oran  University of Manchester, (2007)  
The Computation of Turbulent, BuoyancyDriven flows in Cavities, Ali Omranian, MPhil Thesis, The University of Manchester, (2007)  
Experimental Investigation on Sooty Flames at Elevated Pressures, Hamidreza Gohari Darabkhani, 1st Year PhD Report, School of MACE, The University of Manchester, (2007)  
Thrust Vector Control with Secondary Injection, Erdem E., MSc Dissertation, Mechanical Engineering, Middle East Technical University(METU) Ankara, (2006)  
A StressStrain Lag Eddy Viscosity Model for Mean Unsteady Turbulent Flows, A.J. Revell, PhD Thesis, The University of Manchester, (2006)  
An industrial approach to near wall turbulence modelling for unstructured ﬁnite volume methods., Uribe, J.C, PhD Thesis, University of Manchester, (2006)  
Unsteady Heat Transfer and Turbulent Flows with NonLinear Models , Parham Momeni, 1st Year PhD Report, Manchester University, (2005)  
The Experimental and Numerical Investigation of the Flow Field Inside a Solid Propellant Booster in Presence of Slag Accumulation, Erdem E., MSc Dissertation, EA department, von Karman Institute for Fluid Dynamics, Belgium, (2005)  
The UMISTN NearWall Treatment Applied to Periodic Channel Flow, Bryn Richards, MPhil Thesis, UMIST, (2005)  
Calibration of the TE44 Subsonic Wind Tunnel and Tests on Different Aerodynamics Profiles., Dalila Ammour, MEng Dissertation, University of Science and Technology U.S.T.ORANMB. Marine Engineering Departement. Faculty of Mechanical Engineering, (2005)  
Large Eddy Simulations of Bluff Body, Mixed and Natural Convection Turbulent Flows with Unstructured FV Codes, Y. Addad, PhD Thesis, Department of Mechanical, Aerospace and Manufacturing Engineering, UMIST, (2005)  
Industrial use of LES: Numeric, Inlet Boundary Conditions, Wall Flows and Hanging Nodes, Nicolas Jarrin, MSc Dissertation, The University of Manchester, (2004)  
Numerical modeling of Heat transfer and turbulent flows with nonlinear models, Parham Momeni, MSc Dissertation, UMIST, (2004)  
Numerical simulation of flow stratification around a fire in a tunnel under forced longitudinal ventilation, Revell, A. J., MEng Dissertation, UMIST, (2002)  
Burning Enhancement Using Fuel Additives, Hamidreza Gohari Darabkhani, MSc Dissertation, Amirkabir University of Technology (Tehran Polytechnic), (2001)  
Design and Optimisation of Cooling Towers with Contraflow , Hamidreza Gohari Darabkhani, MEng Dissertation, Amirkabir University of Technology (Tehran Polytechnic), (1997) 
%TMPL:END%