|
Tim Craft
Senior Lecturer,
|
||
|
Research Interests:
Turbulence modelling, CFD, Heat transfer |
||
|
|
Research Publications:
Research Publications: | |
A NEW DIVERGENCE FREE SYNTHETIC EDDY METHOD FOR FULL REPRODUCTION OF INLET FOR EMBEDDED LES, R. Poletto, A. Revell, T. Craft, ETMM 9 - Tessaloniki, (2012) |
| |
Computation of Turbulent Natural Convection Flow Inside Horizontal Cylindrical Penetration Enclosure Using URANS and LES Approches (ABSTRACT), D. Ammour, T. J Craft and H. Iacovides, THMT (7th International Symposium on Turbulence, Heat and Mass Transfer) 2012, September 24-27, (2012) |
| |
Model Validation for Buoyancy Driven Flows Inside 2-D Differentially-Heated Cavities., D. Ammour, T. J. Craft, H. Iacovides, UKHTC (UK Heat Transfer Conference) 2011. Leeds, UK., (2011) |
| |
DEVELOPMENTS IN TWO-TIME-SCALE TURBULENCE MODELS APPLIED TO NON-EQUILIBRIUM FLOWS, T. Klein, T. Craft and H. Iacovides, TSFP-7, (2011) |
| |
Embedded DDES of 2D hump flow, R. Poletto, A. Revell, T. Craft, N. Ashton, HRLM 4 - Beijing, (2011) |
| |
LES and URANS Numerical Analysis of Turbulent Natural Convection Flow Inside 3-D Rectangular Tilted Differentially Heated Cavities (ABSTRACT), D. Ammour, T. J. Craft, H. Iacovides, ETMM9 (9th International ERCOFTAC Symposium on Engineering Turbulence Modelling and Measurements) 2011, 6-8 June 2011. Thessaloniki, Greece., (2011) |
| |
Divergence Free Synthetic Eddy Method for Embedded LES inflow Boundary Conditions, R. Poletto, A. Revell, T. Craft, N. Jarrin, 7th TSFP - Ottawa, (2011) |
| |
LES and URANS Numerical Analysis of Turbulent natural Convection Flow Inside 3-D Rectangular Tilted Differentially-Heated Cavities (POSTER), D. Ammour, T.J. Craft, H. Iacovides, PGR 2011, (2011) |
| |
Application of Recently Developed Elliptic Blending Based Models to Separated Flows, Flavien Billard, Alistair Revell and Tim Craft, Submitted to International Journal of Heat and Fluid Flow, (2011) |
| |
Applications of advanced Reynolds Stress transport models to highly separated flows, Billard F, Revell A and Craft T, TSFP7 - Ottawa, (2011) |
| |
Towards a DF-SEM (abstract), R. Poletto, A. Revell, T. Craft, N. Jarrin, TSFP, (2010) |
| |
TWO-TIME-SCALE TURBULENCE MODELS FOR NON-EQUILIBRIUM FLOWS, T. Klein, T. Craft and H. Iacovides, ETMM-8, (2010) |
| |
The Validation of Code_Saturne for Buoyancy-Driven Flows In Differentially-Heated Cavities (POSTER), D. Ammour, T. J. Craft, H. Iacovides, PGR 2010. Manchester, UK., (2010) |
| |
LES and URANS Computations of Buoyancy-driven Flows Inside Differentially Heated Cavities (POSTER), D. Ammour, T. J. Craft, H. Iacovides, Annual Code_Saturne Meeting, (2010) |
| |
The investigation of buoyant flows in differentially heated cavities, D. Cooper, T.J. Craft, K. Esteifi, H. Iacovides and A. Omranian, Turbulence Heat and Mass Transfer 6, Rome, (2009) |
| |
THE COMPUTATION OF BUOYANT FLOWS IN DIFFERENTIALLY HEATED VERTICAL AND INCLINED CAVITIES, Tim J Craft, Hector Iacovides, Ali Omranian, The Sixth International Symposium on Turbulence and Shear Flow Phenomena June 22-24, 2009 Seoul National University, Seoul, Korea, (2009) |
| |
THE COMPUTATION OF BUOYANT FLOWS IN DIFFERENTIALLY HEATED INCLINED CAVITIES, T.J. Craft, H. Iacovides and A. Omranian, UK Heat Transfer Conference 2009, London, (2009) |
| |
Modelling of three-dimensional jet array impingement and heat transfer on a concave surface, T.J. Craft, H. Iacovides, N.A. Mostafa, Int. J. Heat and Fluid Flow, Vol. 29, pp. 687-702, (2008) |
| |
Numerical modelling of flow and heat transfer from an array of jets impinging onto a concave surface under stationary and rotating conditions, T.J. Craft, H. Iacovides, N.A.Mostafa, Paper GT2008-50624, Proc. ASME Turbo Expo 2008: Power for Land, Sea and Air, Berlin, (2008) |
| |
Application of the Finite-Volume Method to Fluid-Structure Interaction Analysis, Craft T J, Iacovides H, Yates M.N, European Fluid Mechanics Conference, 2008, Manchester, Sept 2008, (2008) |
| |
Some swirling-flow challenges for turbulent CFD, T.J. Craft, H. Iacovides, B.E. Launder, A. Zacharos, Flow Turbulence and Combustion, Vol. 80, pp. 419-434, (2008) |
| |
Modelling the Effect of Flow Pulsation on Turbulent Flow in A 10o Plane Diffuser, . Craft T J, Iacovides H, Momeni P, European Fluid Mechanics Conference, Manchester, Sept 2008, (2008) |
| |
Some swirling-flow challenges for turbulent CFD, T.J. Craft, H. Iacovides, B.E. Launder, A. Zacharos, Proc. of CHT-08, ICHMT Int. Symp. on Advances in Computational Heat Transfer, Marrakech, Morocco, (2008) |
| |
CONVECTIVE HEAT TRANSFER IN PULSED SEPARATED FLOWS , T.J. Craft, H. Iacovides, P. Momeni*, UK Heat transfer conference September Edinburgh, (2007) |
| |
Modelling the effect of forced unsteadiness on flow and heat transfer in separated and reattaching flows, T.J. Craft, H. Iacovides, P. Momeni, Proc. 5th Int. Symp. on Turbulence and Shear Flow Phenomena, Munich, (2007) |
| |
Modelling of three-dimensional jet impingement cooling on a concave surface, T.J. Craft, H. Iacovides, N.A. Mostafa, Proc. 7th European Conference on Turbomachinery Fluid Dynamics and Thermodynamics, Athens, (2007) |
| |
Turbulence modelling of Strongly Detached Unsteady Flows: The Circular Cylinder, Revell A, Craft T J, Laurence D R P., Second Symposium on Hybrid RANS-LES Methods, Corfu, Greece.. 17 June 2007, (2007) |
| |
MODELLING FLOW AND HEAT TRANSFER IN SEPARATED AND REATTACHING FLOWS , T. J. Craft, H. Iacovides, P. Momeni*, Graduate Research conference June, Manchester, (2007) |
| |
Computational investigation of flow through a rotating square duct by means of advanced second-moment closure, A. Boudjir, T.J. Craft, A. Turan, Flow Turbulence and Combustion, Vol. 79, pp. 99-122, (2007) |
| |
Flow and heat-transfer modelling of three-dimensional jet impingement on a concave surface , T.J. Craft, H. Iacovides, N.A. Mostafa, Proc. 5th Int. Symp. on Turbulence and Shear Flow Phenomena, Munich, (2007) |
| |
Development and application of wall-function treatments for turbulent forced and mixed convection flows, Craft, T.J., Gant, S.E., Gerasimov, A.V., Iacovides, H., Launder, B.E, Fluid Dyn. Res., Vol. 38, pp. 127-144, (2006) |
| |
A computational study of the near-field generation and decay of wingtip vortices, Craft, T.J., Gerasimov, A.V., Launder, B.E., Robinson, C.M.E., Int. J. Heat Fluid Flow, Vol. 27, pp. 684-695, (2006) |
| |
A stress-strain lag eddy viscosity model for unsteady mean flow, Revell, A.J., Benhamadouche, S., Craft, T.J., Laurence, D.R., Int. J. Heat Fluid Flow, Vol. 27, pp. 821-830, (2006) |
| |
An analytical wall-function for turbulent flows and heat transfer over rough walls, Suga, K., Craft, T.J., Iacovides, H., Int. J. Heat Fluid Flow, Vol. 27, pp. 852-866, (2006) |
| |
A stress-strain lag EVM for mean unsteady and non-equilibrium flows, Revell A, Craft T J, Laurence D R P, Code_Saturne User Conference, Paris, France.. November 2006, (2006) |
| |
A generalized analytical wall function, Suga, K., Craft, T.J., Iacovides, H., Trans. Japan Society of Mechanical Engineers B, Vol. 71 No. 711(2005-11), pp. 113-121, (2005) |
| |
Computation of Flow and Heat Transfer in Abrupt Pipe Expansions using Non-Linear Eddy-Viscosity Models of Turbulence, T.J. Craft, H. Iacovides, P. Momeni, 9th UK National Heat Transfer Conference, Manchester, (2005) |
| |
An Analytical Wall-Function for Turbulent Rough Wall Heat Transfer, K. Suga, T.J. Craft, H. Iacovides, 4th International Symposium on Turbulence and Shear Flow Phenomena (TSFP4), Williamsburg, Virginia USA, (2005) |
| |
Development and implementation of the three equation stress-strain lag turbulence model, Revell A, Craft T J, Laurence D R P., Code_Saturne User Conference, Paris, France. November 2005, (2005) |
| |
Extending an analytical wall-function for turbulent flows over rough walls, K. Suga, T.J. Craft, H. Iacovides, ETMM6, ERCOFTAC International Symposium on Engineering Turbulence Modelling and Measurements, Sardinia, Italy, (2005) |
| |
Application of a Generalised RANS Wall-Function, to Recirculating Flows with Heat Transfer, T.J.Craft, S.E. Gant and H. Iacovides, ICCHMT4, 4th International Conference on Computational Heat and Mass Transfer, Paris, France, May 2005, (2005) |
| |
A stress-strain lag eddy viscosity model for unsteady mean flow, Revell A, Benhamadouche S, Craft T J, Laurence D R P, Yaqobi K., Engineering Turbulence Modelling and Experiments 6: ERCOFTAC International Symposium on Engineering Turbulence and Measurements - ETMM6, Sardinia, Italy.. Editor W. Rodi, M. Mulas, eds.. 22 May 2005, (2005) |
| |
Three-dimensional simulation of rotor-stator cavity flow , Craft, T.J., Gant S.E., Iacovides, H., Launder, B.E. and Serre, E, _CSAR Focus Magazine (http://www.csar.cfs.ac.uk/about/csarfocus/)_, Vol. 31, (2004) |
| |
The negatively buoyant turbulent wall jet: performance of alternative options in RANS modelling, Craft, T.J., Gerasimov, A.V., Iacovides, H., Kidger, J.W., Launder, B.E., Int. J. Heat and Fluid Flow, Vol. 25, pp. 809-823, (2004) |
| |
A new wall function strategy for complex turbulent flows, Craft, T.J., Gant, S.E., Iacovides, H., Launder, B.E., Numerical Heat Transfer, Vol. 45, pp. 301-318, (2004) |
| |
The negatively buoyant turbulent wall jet: performance of alternative options in RANS modelling, Craft, T.J., Gerasimov, A.V., Iacovides, H., Kidger, J.W., Launder, B.E, Proc. 4th Int. Symp. on Turbulence, Heat and Mass Transfer, Antalya, Turkey, (2003) |
| |
Application of a New Wall-Function Strategy to Turbulent Mixed and Natural Convection in Vertical Flows, T.J. Craft, A. V. Gerasimov, H. Iacovides and B. E. Launder, UK National Heat Transfer Conference, Oxford, (2003) |
| |
A new wall-function strategy applied to mixed convection in vertical annular passages, Craft, T.J., Gerasimov, A.V., Iacovides, H., Launder, B.E., Proc. Conference on Modelling Fluid Flow, The 12th International Conference on Fluid Flow Technologies, Budapest, Hungary, (2003) |
| |
Two-time-scale turbulence modelling of a fully-pulsed axisymmetric air jet, Bremhorst, K., Craft, T.J., Launder, B.E., Proc. 3rd Int. Symposium on Turbulent Shear Flow Phenomena, Sendai, Japan, (2003) |
| |
Progress in the generalization of wall-function treatments, Craft, T.J., Gerasimov, A.V., Iacovides, H., Launder, B.E, Int. J. Heat Fluid Flow, Vol. 23, pp. 148-160, (2002) |
| |
Principles and performance of TCL-based second-moment closures, Craft, T.J., Launder, B.E., Flow Turbulence & Combustion, Vol. 66, pp. 355-372, (2001) |
| |
Reynolds-stress modeling of afterbody flows, Batten, P., Craft, T.J., Leschziner, M.A., The Aeronautical Journal, Vol. 105, pp. 297-306, (2001) |
| |
On the spreading mechanism of the three-dimensional turbulent wall jet, Craft, T.J., Launder, B.E., J. Fluid Mech., Vol. 435, pp. 305-326, (2001) |
| |
On modelling periodic motion with turbulence closures, Cotton, M.A., Craft, T.J., Guy, A.W., Launder, B.E., Flow Turbulence & Combustion, Vol. 67, pp. 143-158, (2001) |
| |
Second-moment modelling of developing and self-similar three-dimensional turbulent free-surface jets, Craft, T.J., Kidger, J.W., Launder, B.E, Int. J. Heat Fluid Flow, Vol. 21, pp. 338-344, (2000) |
| |
Progress in the use of non-linear two-equation models in the computation of convective heat-transfer in impinging and separated flows, Craft, T.J., Iacovides, H., Yoon, J.H., Flow Turbulence & Combustion, Vol. 63, pp. 59-80, (1999) |
| |
Reynolds-stress-transport modeling for compressible aerodynamics applications, Batten, P., Craft, T.J., Leschziner, M.A., Loyau, H., AIAA Journal, Vol. 37, pp. 785-796, (1999) |
| |
Developments in a low-Reynolds-number second-moment closure and its application to separating and reattaching flows, Craft, T.J., Int. J. Heat Fluid Flow, Vol. 19, pp. 541-548, (1998) |
| |
Prediction of turbulent transitional phenomena with a nonlinear eddy-viscosity model, Craft, T.J., Launder, B.E., Suga, K., Int. J. Heat Fluid Flow, Vol. 18, pp. 15-28, (1997) |
| |
Development and application of a cubic eddy-viscosity model of turbulence, Craft, T.J., Launder, B.E., Suga, K., Int. J. Heat and Fluid Flow, Vol. 17, pp. 108-115, (1996) |
| |
Recent developments in second-moment closure for buoyancy-affected flows, Craft, T.J., Ince, N.Z., Launder, B.E., Dynamics of Atmospheres and Oceans, Vol. 23, pp. 99-114, (1996) |
| |
A Reynolds stress closure designed for complex geometries, Craft, T.J., Launder, B.E., Int. J. Heat Fluid Flow, Vol. 17, pp. 245-254, (1996) |
| |
Impinging jet studies for turbulence model assessment. Part II: An examination of the performance of four turbulence models, Craft, T.J., Graham, L.J.W., Launder, B.E., Int. J. Heat Mass Transfer, Vol. 36, pp. 2685-2697, (1993) |
| |
On the adequacy of the thin-shear-flow equations for computing turbulent jets in stagnant surroundings, El Baz, A., Craft, T.J., Ince, N.Z., Launder, B.E., Int. J. Heat Fluid Flow, Vol. 14, pp. 164-169, (1993) |
| |
New wall-reflection model applied to the turbulent impinging jet, Craft, T.J., Launder, B.E, AIAA Journal, Vol. 30, pp. 2970-2972, (1992) |
Theses, Dissertations and Technical Reports:
Theses, Dissertations and Technical Reports: | |
Numerical Study of Turbulence Induced Vibrations in Pipe Bends using Computational Fluid Dynamics, Revell A, Zacharos A, Jarrin N, Afgan I, Craft T J., Technical Report, University of Manchester, (2007) |
Presentations:
Presentations: | |
Divergence Free Synthetic Eddy Method for Embedded LES inflow Boundary Conditions, TSFP7 - Ottawa, (07 2011) |
| |
Modelling of Three-Dimensional Jet Impingement Cooling on a Concave Surface, _TSFP5. 5th International Symposium on Turbulence and Shear Flow Phenomena, (August 2007) |