Research Publications: Research Publications:
A Stress-strain Lag Eddy Viscosity Model for Variable Density Flow, Assad, M, . Prosser, R., Revell, A., Sapa, B., ERCOFTAC Bulletin, Vol. 96, pp. 4-10, (2013) | |
Development of an Alternative Delayed Detached-Eddy Simulation Formulation Based on Elliptic Relaxation, N. Ashton, A. Revell, R. Prosser, J. Uribe, AIAA journal, Vol. 51, pp. 513-519, (2013) | |
A New Divergence Free Synthetic Eddy Method for the Reproduction of Inlet Flow Conditions for LES, R. Poletto, A. Revell, T. Craft, Journals of Flow, Turbulence and Combustion, (2013) | |
A New Divergence Free Synthetic Eddy Method for the Reproduction of Inlet Flow Conditions for LES, R. Poletto, A. Revell, T. Craft, Journal of Flow, Turbulence and Combustion, (2013) | |
A NEW DIVERGENCE FREE SYNTHETIC EDDY METHOD FOR FULL REPRODUCTION OF INLET FOR EMBEDDED LES, R. Poletto, A. Revell, T. Craft, ETMM 9 - Tessaloniki, (2012) | |
CFD prediction of turbulent flow on an experimental tidal stream turbine using RANS modelling, James McNaughton , Stefano Rolfo, David Apsley, Imran Afgan, Peter Stansby, Tim Stallard, 1st Asisan Wave and Tidal Energy Conference, Jeju Island, South Korea, (2012) | |
Computation of Turbulent Natural Convection Flow Inside Horizontal Cylindrical Penetration Enclosure Using URANS and LES Approches (ABSTRACT), D. Ammour, T. J Craft and H. Iacovides, THMT (7th International Symposium on Turbulence, Heat and Mass Transfer) 2012, September 24-27, (2012) | |
Impact of Co-flow Air on Buoyant Diffusion Flames Flicker, H. Gohari Darabkhani, Q. Wang, L. Chen and Y. Zhang, Energy Conversion and Management (ECM), Vol. 52, pp. 2996-3003, (2011-) | |
Model Validation for Buoyancy Driven Flows Inside 2-D Differentially-Heated Cavities., D. Ammour, T. J. Craft, H. Iacovides, UKHTC (UK Heat Transfer Conference) 2011. Leeds, UK., (2011) | |
DEVELOPMENTS IN TWO-TIME-SCALE TURBULENCE MODELS APPLIED TO NON-EQUILIBRIUM FLOWS, T. Klein, T. Craft and H. Iacovides, TSFP-7, (2011) | |
Embedded DDES of 2D hump flow, R. Poletto, A. Revell, T. Craft, N. Ashton, HRLM 4 - Beijing, (2011) | |
LES and URANS Numerical Analysis of Turbulent Natural Convection Flow Inside 3-D Rectangular Tilted Differentially Heated Cavities (ABSTRACT), D. Ammour, T. J. Craft, H. Iacovides, ETMM9 (9th International ERCOFTAC Symposium on Engineering Turbulence Modelling and Measurements) 2011, 6-8 June 2011. Thessaloniki, Greece., (2011) | |
Fluid-Structure Interactions: A Brief Review of Existing Strategies, M. Ya-Alimadad, R. Prosser, K. Davey, ERCOFTAC bulletin, Vol. 86, pp. 17-20, (2011) | |
Thermal-hydraulic simulations of a wire spacer fuel assembly, S. Rolfo, C. Peniguel, M. Guillaud and D. Laurence, Submitted to Nuclear Engineering and Design, (2011) | |
Divergence Free Synthetic Eddy Method for Embedded LES inflow Boundary Conditions, R. Poletto, A. Revell, T. Craft, N. Jarrin, 7th TSFP - Ottawa, (2011) | |
LES and URANS Numerical Analysis of Turbulent natural Convection Flow Inside 3-D Rectangular Tilted Differentially-Heated Cavities (POSTER), D. Ammour, T.J. Craft, H. Iacovides, PGR 2011, (2011) | |
Soot Concentration and Temperature Measurements in Co-flow Laminar Propane-Air Diffusion Flames at Pressures up to 7 bar, H. Gohari Darabkhani, J. Oakey, and Y. Zhang, Proceedings of 49th AIAA Aerospace Sciences Meeting, Vol. Paper No.: AIAA 2011-243, (2011) | |
Application of Recently Developed Elliptic Blending Based Models to Separated Flows, Flavien Billard, Alistair Revell and Tim Craft, Submitted to International Journal of Heat and Fluid Flow, (2011) | |
Improving Stability Limits of Natural Gas Buoyant Diffusion Flames with Co-flow of Air, H. Gohari Darabkhani, J. Oakey, Y. Zhang, Energy Sustainability Conference & Fuel Cell Conference (ESFuelCell2011), 7-10 August 2011, Washington DC, USA, (2011) | |
Optimizing Code_Saturne computations on Petascale systems, Fournier, Y and Bonelle, J and Moulinec, C and Shang, Z and Sunderland, AG and Uribe, JC, Computers & Fluids, Vol. 45, pp. 103-108, (2011) | |
A robust k-ep-v2/k elliptic blending turbulence model for near-wall, wake, separated and buoyant flows, Flavien Billard and Dominique Laurence, International Journal of Heat and Fluid Flow (Accepted 2011-11-02, 1st Submitted 2011-01-14), (2011) | |
Applications of advanced Reynolds Stress transport models to highly separated flows, Billard F, Revell A and Craft T, TSFP7 - Ottawa, (2011) | |
Large eddy simulation of the flow around single and two side-by-side cylinders at subcritical Reynolds numbers, I. Afgan, Y. Kahil, S. Benhamadouche and P. Sagaut, Physics of Fluids, Vol. 23, pp. 075101, (2011) | |
A hybrid numerical scheme for a new formulation of delayed detached-eddy simulation (DDES) based on elliptic relaxation, N. Ashton, A. Revell, R. Prosser, Journal of Physics: Conference Series, 13th European Turbulence Conference, Vol. 318, (2011) | |
Methane Diffusion Flame Dynamics at Elevated Pressures, H. Gohari Darabkhani and Y. Zhang, Journal of Combustion Science and Technology (CST), Vol. 182 (3), pp. 231-251, (2010-) | |
Dépôt d'aérosols dans une conduite coudée à 90°, Y. Kahil, D. Laurence et A. S. Berrouk, Editions Universitaires Européennes ISBN: 978-6131523595, (2010) | |
Towards a DF-SEM (abstract), R. Poletto, A. Revell, T. Craft, N. Jarrin, TSFP, (2010) | |
Numerical Simulation of Wave-Structure Interaction wave energy conversion applications using Eulerian and Lagrangian CFD Methods, Westphalen J. Greaves D M. Hu Z Z, Omidvar P. Causon D M, Accepted for the 3rd International Conference and Exhibition on Ocean energy, Spain., (2010) | |
TWO-TIME-SCALE TURBULENCE MODELS FOR NON-EQUILIBRIUM FLOWS, T. Klein, T. Craft and H. Iacovides, ETMM-8, (2010) | |
Computation of fluid forces acting on an infinite cylinder submitted to a single phase cross flow, A. Adobes, F. Jusserand, S. Benhamadouche, Y. Kahil and S. Belouah, 7th International Symposium on Fluid-Structure Interactions, Flow-Sound Interactions, and Flow-Induced Vibration & Noise, Montreal, Québec, Canada, August 1-4, (2010) | |
SPH for a 2-D and 3-D heaving body using variable mass particle distribution, Omidvar P. Stansby P K. Rogers B D, Proc. of 5th Int. SPHERIC Workshop, Manchester, UK, pp. 282-288, (2010) | |
Impact of Co-flow Air on Buoyant Diffusion Flames Flicker, H. Gohari Darabkhani, Q. Wang and Y. Zhang, journal of Energy Conversion and Management (ECM), Vol. under review, (2010) | |
Flow Control using Thermal Bumps in Hypersonic Flows, L.Yang, E.Erdem and K.Kontis, Erdem E., et al., 48th AIAA Aerospace Sciences Meeting and Exhibit, Reno, NV, (2010), (2010) | |
The Validation of Code_Saturne for Buoyancy-Driven Flows In Differentially-Heated Cavities (POSTER), D. Ammour, T. J. Craft, H. Iacovides, PGR 2010. Manchester, UK., (2010) | |
Computation of Flow in a 3D Diffuser Using a Two-Velocity Field Hybrid RANS/LES , J. C. Uribe, A. Revell and C. Moulinec, Turbulence and Interactions, Vol. 110, pp. 385--391, (2010) | |
Wave body interaction in 2D using Smoothed Particle Hydrodynamics (SPH) including variable particle mass, Omidvar P. Stansby P K. Rogers B D., Submitted for publication, (2010) | |
Thermal-hydraulics and Conjugate Heat Transfer Calculation in a Wire-Wrapped SFR Assembly, C. Péniguel, I. Rupp, S. Rolfo and M. Guillaud, Proceedings of ICAPP ‘10 San Diego, CA, USA, June 13-17, 2010 Paper 10174, (2010) | |
An improved dissipation rate equation for the v2f model to account for turbulent transport mechanism in a boundary layer, Billard, F. and Laurence, D. and Uribe, J., ETMM8, (2010) | |
Fine large eddy simulation of the flow around one and two side-by-side infinite cylinders at subcritical Reynolds numbers, Y. Kahil, S. Benhamadouche and P. Sagaut, V European Conference on Computational Fluid Dynamics, ECCOMAS CFD, Lisbon, Portugal, 14–17 June, (2010) | |
LES and Hybrid RANS/LES of turbulent flow in fuel rod bundle in a triangular array, S. Rolfo, J. C. Uribe, D. Laurence, Direct and Large-Eddy Simulation VII, pp. 409-414, (2010) | |
Pressure Effects on Structure and Temperature Field of Laminar Diffusion Flames, H. Gohari Darabkhani and Y. Zhang, Proceedings of 48th AIAA Aerospace Sciences Meeting, Orlando, Florida, 4-7 Jan 2010, Vol. AIAA-2010, pp. 779-795, (2010) | |
Stochastic Simulation of the Uplift process for the Irish Electricity Market, M. Jablonska, A. Mayrhofer, J. P. Gleeson, Mathematics-in-Industry Case Studies, Vol. 2, (2010) | |
Suppression Dynamics of a Laminar Oscillating Diffusion Flame with Co-flow Air, H. Gohari Darabkhani and Y. Zhang, Accepted for publication in the Proceedings of the World Congress of Engineering (ICME 2010), (2010) | |
Numerical Simulation of Wave Energy Converters using Eulerian and Lagrangian CFD Methods, Westphalen J, Greaves D M, Hunt-Raby R, Williams C K, Taylor P H, Hu Z Z, Omidvar P, Causon D M, Mingham C G, Stansby P K, Rogers B D, Accepted for the 20th International Society of Offshore and Polar Engineers Conference, Beijing China, (2010) | |
Development of a Two-velocities Hybrid RANS-LES Model and its Application to a Trailing Edge Flow, J. Uribe, N. Jarrin, R. Prosser, D. Laurence, Journal of Flow Turbulence and Combustion (DOI: 10.1007/s10494-010-9263-6), Vol. 85, pp. 181 - 197, (2010) | |
LES and URANS Computations of Buoyancy-driven Flows Inside Differentially Heated Cavities (POSTER), D. Ammour, T. J. Craft, H. Iacovides, Annual Code_Saturne Meeting, (2010) | |
The investigation of buoyant flows in differentially heated cavities, D. Cooper, T.J. Craft, K. Esteifi, H. Iacovides and A. Omranian, Turbulence Heat and Mass Transfer 6, Rome, (2009) | |
Study of Non-Plasma and Plasma Jets in Transverse Hypersonic Cross Flow, Erdem E., et al., CEAS 2009 European Air and Space Conference, (2009) | |
Prediction of Flow and Heat Transfer Through Stationary and Rotating Ribbed Ducts Using A Non-linear k-ε Model. , .M. Raisee, H. Naeimi, M. Alizadeh and H. Iacovides, Flow, Turbulence and Combustion, Vol. 82, pp. 121-153, (2009) | |
Extreme Wave Loading on Offshore Wave Energy Devices using CFD: a Hierarchical Team Approach, Westphalen J, Greaves D M, Williams C K, Taylor P H, Causon D M, Mingham C G, Hu Z Z, Stansby P K, Rogers B D, Omidvar P, 8th European Wave and Tidal Energy Conference, (2009) | |
Computation of ﬂow around a naca 0015 aerofoil with znmf jet control: Potential savings of an unstructured mesh?, J. Uribe, A. Revell, C. Moulinec, V. Kitsios, A. Ooi, and J. Soria., 6th International Symposium on Turbulence and Shear Flow Phenomena., Seoul, Korea, (2009) | |
Drag Reduction by Energy Deposition in Hypersonic Flows Reference, Erdem et al., 16th AIAA/DLR/DGLR International Space Planes and Hypersonic Systems and Technologies Conference, (2009) | |
A_Stabilised_Incompressible_SPH_Based_on_the_Projection_Method.pdf, R. Xu, P. Stansby, D. Laurence, 4th international SPHERIC workshop, Nantes, France, (2009) | |
Accuracy and Stability in Incompressible SPH (ISPH) Based on the Projection Method and A New Approach, R. Xu, P. Stansby, D. Laurence, Journal of Computational Physics, (2009) | |
Numerical predictions for transverse injection flows, Erdem E., et al., , 27th International Symposium on Shock Waves, St.Petersburg, Russia, (2009) | |
Reconstruction of Turbulent Fluctuations for Hybrid RANS-LES simulations using a synthetic Eddy Method, N. Jarrin, R. Prosser, J. Uribe, S. Benhamadouche, D. Laurence, Int. Journal of Heat and Fluid Flow, Vol. 30, pp. 435-442, (2009) | |
THE COMPUTATION OF BUOYANT FLOWS IN DIFFERENTIALLY HEATED VERTICAL AND INCLINED CAVITIES, Tim J Craft, Hector Iacovides, Ali Omranian, The Sixth International Symposium on Turbulence and Shear Flow Phenomena June 22-24, 2009 Seoul National University, Seoul, Korea, (2009) | |
Flow Physics and Acoustic Analysis of a Generic Mirror at a High Reynolds Number, Afgan, I., Guleren, K. M. and Laurence, D., International Bhurban Conference on Applied Sciences & Technology (IBCAST), Islamabad. Accepted for 5-8 Jan 2009, (2009) | |
Methane Diffusion Flame Dynamics at Elevated Pressures, Hamidreza Gohari Darabkhani and Yang Zhang, PGR-MACE09, Vol. 1, pp. 12-13, (2009) | |
Investigation of surface waves interacting with a fixed cylinder and generated by a heaving cylinder using Smoothed Particle Hydrodynamics (SPH), Omidvar P. Stansby P K. Rogers B D, Proc. of 33rd IAHR Congress: Water Engineering for Sustainable Environment, Vancouver Canada, pp. 7447-7454, (2009) | |
Developing a Petaflop Computational Fluid Dynamics Capability for Energy and Environment, Moulinec, C., Sunderland, A. G., Emerson, D., Gu, X., Fournier, Y., Uribe, J. C., International conference on parallel, distributed and grid computing for engineering, (2009) | |
The application of laminar kinetic energy to laminar-turbulent transition prediction, C. Turner and R. Prosser, 6th Turbulence, Heat and Mass Transfer conference, Rome, Italy, (2009) | |
SPH for free-surface flow around a heaving oscillating cylinder using variable particle mass distributions: 2-D investigations, Omidvar P. Stansby P K. Rogers B D., Proc. of 4th International SPHERIC Workshop, pp. 347-352, (2009) | |
Numerical and Experimental Investigation of Transverse Injection Flows, Erinc Erdem, Konstantinos Kontis, Journal of Shock Waves (in press), (2009) | |
THE COMPUTATION OF BUOYANT FLOWS IN DIFFERENTIALLY HEATED INCLINED CAVITIES, T.J. Craft, H. Iacovides and A. Omranian, UK Heat Transfer Conference 2009, London, (2009) | |
Three Dimensional Conjugated Heat Transfer Analysis in Sodium Fast Reactor Wire-Wrapped Fuel Assembly, C. Péniguel, I. Rupp, JP. Juhel, S. Rolfo, M. Guillaud, N. Gervais, Proceedings of ICAPP ‘09 Tokyo, Japan, May 10-14, 2009 Paper 9311, (2009) | |
Effects of Exit Nozzle Diameter on Compressible Vortex Rings Flow Structure, R. Mariani and K. Kontis, 47th AIAA Aerospace Sciences Meeting Including The New Horizons Forum and Aerospace Exposition 5 - 8 January 2009, Orlando, Florida, Vol. AIAA 2009-410, pp. 15, (2009) | |
Heat and fluid flow simulations for deciding tomorrow's energies, J-P. Chabard, D. Laurence, (THMT6), Turbulence, Heat and Mass Transfer 6, 14-18 September 2009, Rome., (2009) | |
Fuel effects on Diffusion Flames at Elevated Pressures, H. Gohari Darabkhani, J. Bassi, H. W. Huang and Y. Zhang, Journal of Fuel, Vol. 88 (2), pp. 264-271, (2009) | |
Non-Plasma and Plasma Transverse Jets in Hypersonic Cross Flow, Erdem et al., 16th AIAA/DLR/DGLR International Space Planes and Hypersonic Systems and Technologies Conference, (2009) | |
Impact of Pressure and Fuel Flow Rate on Flame Dynamics in a High Pressure Combustor, H. Gohari Darabkhani and Y. Zhang, Proceeding of CEAS 2009 European Air and Space Conference, 26-29 October 2009, Manchester, UK, Vol. Conference DVD, pp. Day2 - Propulsion Session, (2009) | |
Impact of Pressure on Diffusion Flame Structure (poster presentation), H. Gohari Darabkhani and Y. Zhang, PGR-MACE09 Conference, The University of Manchester, Vol. 1, pp. 75, (2009) | |
Diffusion flame dynamics under elevated pressures, J. Bassi, H. G. Darabkhani, H. W. Huang and Y. Zhang, 32nd International Symposium on Combustion, (2008) | |
Laminarization of Internal Flows under the Combined Effect of Strong Curvature and Rotation, Guleren, K. M., Afgan, I. and Turan, A., ASME Journal of Fluids Engineering, Vol. Vol 130, (2008) | |
Heavy particle dispersion from a point source in turbulent pipe flow, A. S. Berrouk, D. E. Stock, D. Laurence, J. J. Riley, International Journal of Multiphase Flow, (2008) | |
The Computation of Buoyant Flows in Differentially Heated Cavities, Omranian A, Iacovides H, European Fluid Mechanics Conference, Manchester, Sept 2008, (2008) | |
Numerical investigation of the flow field inside a conical rocket nozzle in the presence of transverse injection, Erdem E., et al., 46th AIAA Aerospace Sciences Meeting and Exhibit, Reno, NV, (2008) | |
Optimal unstructured meshing for large eddy simulations, Y. Addad, U. Gaitonde, D. Laurence, S. Rolfo, ERCOFTAC Series, Springer, Quality and Reliability of Large-Eddy Simulations. Meyers, Geurts & Sagaut, (Eds.), Vol. 12, pp. 93-103, (2008) | |
Wave loading on a partially and half-submerged circular cylinder using SPH, Omidvar P. Rogers B D.Stansby P K, 4th Young Coastal Scientist and Engineering Conference, Oxford UK., (2008) | |
LES and RANS of Natural Convection in a Nearly-Horizontal Shallow Cavity, Addad Y., Mahmoodilari K. and Laurence D., ICHMT Int. Symp. on Advances in Computational Heat Transfer, Vol. CHT-08-343, (2008) | |
Comparisons of weakly compressible and truly incompressible algorithms for the SPH mesh free particle method, E.-S. Lee, C. Moulinec, R. Xu, D. Violeau, D. Laurence and P. Stansby, Journal of Computational Physics, Available online 19 June 2008. doi:10.1016/j.jcp.2008.06.005, (2008) | |
Investigation of wave loading on a partially submerged cylinder using SPH, Omidvar P. Rogers B D.Stansby P K., Proc. of 3rd Int. SPHERIC Workshop, Lausanne. Switzerland, pp. 245-248, (2008) | |
Experimental and Numerical Studies of In-line Tube Bundles (POSTER), D. Ammour, L. Adjlout, T. Yahiaoui, Code_Saturne User's Meeting. EDF. Paris, FRANCE, (2008) | |
Modelling of three-dimensional jet array impingement and heat transfer on a concave surface, T.J. Craft, H. Iacovides, N.A. Mostafa, Int. J. Heat and Fluid Flow, Vol. 29, pp. 687-702, (2008) | |
Orthogonal blade vortex interaction on a Helicopter tail rotor, Filippone, A., Afgan, I., AIAA Journal, Vol. 46, pp. 1476-89, (2008) | |
A new formulation of the model using elliptic blending and its application to heat transfer prediction, Billard, F. Uribe, J.C. and Laurence, D., Proc. of 7th Int. Symp. on Engineering Turbulence Modelling and Measurements, pp. 89-94, (2008) | |
Simulations of vortex spin-down and Taylor-Green Vortices with Incompressible SPH method, R. Xu, C. Moulinec, P. K. Stansby, B. D. Rogers, D. Laurence, ERCOFTAC SIG SPHERIC III international workshop, (2008) | |
Numerical modelling of flow and heat transfer from an array of jets impinging onto a concave surface under stationary and rotating conditions, T.J. Craft, H. Iacovides, N.A.Mostafa, Paper GT2008-50624, Proc. ASME Turbo Expo 2008: Power for Land, Sea and Air, Berlin, (2008) | |
Application of the Finite-Volume Method to Fluid-Structure Interaction Analysis, Craft T J, Iacovides H, Yates M.N, European Fluid Mechanics Conference, 2008, Manchester, Sept 2008, (2008) | |
ANALYSIS OF THE FLOW DYNAMICS OF COMPRESSIBLE VORTEX RINGS USING COMPRESSIBLE GASES, R. Mariani K. Kontis, Proc. ‘The 6th European Symposium on Aerothermodynamics for Space Vehicles’, Versailles, France, 3–6 November 2008 (ESA SP-659, January 2009), pp. 6, (2008) | |
On the use of high-order finite difference schemes on overset grids for LES in aeroacoustics, F. Daude, T. Emmert, P. Lafon, F. Crouzet, C. Bailly, 7th International ERCOFTAC Symposium on Engineering Turbulence Modelling and Measurements (ETMM7), Limassol, Chyprus, 4-6 June, (2008) | |
Stochastic modelling of aerosol deposition for LES of 90° bend turbulent flow, A. S. Berrouk, D. Laurence, International Journal of Heat and Fluid Flow, Vol. 29, pp. 1010-1028, (2008) | |
Some swirling-flow challenges for turbulent CFD, T.J. Craft, H. Iacovides, B.E. Launder, A. Zacharos, Flow Turbulence and Combustion, Vol. 80, pp. 419-434, (2008) | |
Modelling tsunami overtopping of a sea defence by shallow-water Boussinesq, VOF and SPH methods , P. K. Stansby, R. Xu, B. D. Rogers, et al., Flood Risk Assessment Conference, (2008) | |
The computation of unsteady turbulent flow structures in rotating cavities , . Iacovides H, Launder B E, Zacharos A, European Fluid Mechanics Conference, Manchester, Sept 2008, (2008) | |
Diffusion flame dynamics at elevated pressures, J. Bassi, H. Gohari Darabkhani, H. W. Huang and Y. Zhang, 32nd International Symposium on Combustion, Montreal, Canada, Vol. 1, pp. 82, (2008) | |
Synthetic Inflow boundary conditions for wall bounded flows, N. Jarrin, J. C. Uribe, R. Prosser and D. Laurence, Notes on Numerical fluid mechanics and multidisciplinary design, Advances in Hybrid RANS-LES models (S.-H. Peng and W. Haase eds.), Vol. 97, pp. 77-86, (2008) | |
LES Predictions for the NASA Low-Speed Centrifugal Compressor Impeller, Guleren, K. M., Afgan, I. and Turan, A., ASME Journal of Turbomachinery, Vol. TURBO-07-1087, pp. In Press, (2008) | |
Modelling the Effect of Flow Pulsation on Turbulent Flow in A 10o Plane Diffuser, . Craft T J, Iacovides H, Momeni P, European Fluid Mechanics Conference, Manchester, Sept 2008, (2008) | |
Towards Petascale Computing with Parallel CFD codes, A.G. Sunderland, M. Ashworth, N. Li, C. Moulinec, Y. Fournier and J. Uribe, Parallel CFD 2008, May 19-22, 2008, Lyon, France, (2008) | |
Numerical Simulation of Generic Side Mirror of Car using Large Eddy Simulation with Polyhedral Meshes, Afgan, I., Moulinec, C., Laurence, D., International Journal for Numerical Methods in Fluids, Vol. 57, (2008) | |
Some swirling-flow challenges for turbulent CFD, T.J. Craft, H. Iacovides, B.E. Launder, A. Zacharos, Proc. of CHT-08, ICHMT Int. Symp. on Advances in Computational Heat Transfer, Marrakech, Morocco, (2008) | |
An Overset-Grid Strategy for Aeroacoustics and Aeroelasticity of Moving Bodies, F. Daude, P. Lafon, F. Crouzet, C. Bailly, Fluid-Structure Interaction. Theory, Numerics, Applications, pp. 283--294, (2008) | |
Experimental Investigation on Sooty Flames at Elevated Pressures, H. Gohari Darabkhani, Y. Zhang, PGR-MACE08 Conference, The University of Manchester, Vol. 1, pp. 22, (2008) | |
A high-order algorithm for compressible LES in CAA applications, F. Daude, T. Emmert, P. Lafon, F. Crouzet, C. Bailly, 14th AIAA/CEAS Aeroacoustics Conference, Vancouver, Canada, AIAA Paper 2008-3049, (2008) | |
Stochastic modeling of fluid velocity seen by heavy particles for two-phase LES of non-homogeneous and anisotropic turbulent flows , Berrouk AS, Laurence D, Riley JJ, et al., JOURNAL OF TURBULENCE, Vol. 8 Issue 50, pp. 1-20., (2007 ) | |
Stochastic modeling of fluid velocity seen by heavy particles for two-phase LES of non-homogeneous and anisotropic turbulent flows , Berrouk AS, Laurence D, Riley JJ, et al., ERCOFTAC SERIES, Euromech Colloquium- 477: Particle-Laden Flow, JUN 21-23, 2006 Univ Twente, Enschede, NETHERLANDS, Vol. 11, pp. 179-192, (2007 ) | |
CONVECTIVE HEAT TRANSFER IN PULSED SEPARATED FLOWS , T.J. Craft, H. Iacovides, P. Momeni*, UK Heat transfer conference September Edinburgh, (2007) | |
Wave overtopping from focussed wave groups: experiments and modelling, Stansby, P.K., Hunt, A.C., Xu, R., Taylor, P.H., Borthwick, A.G.L., Feng, T., Laurence, D.R., Flood Risk Assessment Conference, (2007) | |
Advanced Turbulence modelling of wingtip vortices, Revell A, Duraisamy K, Iaccarino G, Turbulence and Shear Flow Phenomena TSPF5, Munich. Germany. 27 August 2007, (2007) | |
On the effects of Lifted Wavelets for Combustion Simulations, Prosser, R., Proceedings of the Institution of Mechanical Engineers - Part C: Journal of Mechanical Engineering Science, Vol. 221, pp. 1579-1596, (2007) | |
Two-Dimensional Prediction of Unsteady Turbulent Flow around a Square Cylinder Confined in a Channel, M. Raisee, A Jafari and H. Iacovides, IUTAM Symposium on Unsteady Separated Flows and their Control, 18-22 June 2007, Corfu, Greece, (2007) | |
Towards Improved Boundary Conditions for the DNS and LES Turbulent Subsonic Flows, Prosser, R., Journal of Computational Physics, Vol. 222, pp. 469-474, (2007) | |
3D Prediction of Flow and Heat Transfer through Ribbed Ducts of Square Cross-Section Using a Cubic Non-linear Low-Reynolds Number k-ε Model, M Raisee, Naieme and H. Iacovides, TSFP7. 7th International Symposium on Turbulence and Shear Flow Phenomena, Munich, August 2007, (2007) | |
Modelling the effect of forced unsteadiness on flow and heat transfer in separated and reattaching flows, T.J. Craft, H. Iacovides, P. Momeni, Proc. 5th Int. Symp. on Turbulence and Shear Flow Phenomena, Munich, (2007) | |
Modelling of three-dimensional jet impingement cooling on a concave surface, T.J. Craft, H. Iacovides, N.A. Mostafa, Proc. 7th European Conference on Turbomachinery Fluid Dynamics and Thermodynamics, Athens, (2007) | |
Numerical Simulation Across In-Line Tube Bundle Using The URANS Approach., D. Ammour, Y, Addad, L. Adjlout, 13th International Conference on Applied Mechanics and Mechanical Engineering AMME-13. Ministry of Defense Military Technical College Kobry Elkobbah. Cairo, EGYPT., (2007) | |
Turbulence modelling of Strongly Detached Unsteady Flows: The Circular Cylinder, Revell A, Craft T J, Laurence D R P., Second Symposium on Hybrid RANS-LES Methods, Corfu, Greece.. 17 June 2007, (2007) | |
MODELLING FLOW AND HEAT TRANSFER IN SEPARATED AND REATTACHING FLOWS , T. J. Craft, H. Iacovides, P. Momeni*, Graduate Research conference June, Manchester, (2007) | |
On the use of embedded meshes in the LES for external flows, Y. Addad, R. Prosser, D. Laurence, S. Moreau, and F. Mendonca, J. Flow Turbulence and combustion, (2007) | |
An adaptive algorithm for compressible reacting flows using interpolating wavelets, Prosser, R., Proceedings of the Institution of Mechanical Engineers - Part C: Journal of Mechanical Engineering Science, Vol. 221, pp. 1397-1410, (2007) | |
Computational investigation of flow through a rotating square duct by means of advanced second-moment closure, A. Boudjir, T.J. Craft, A. Turan, Flow Turbulence and Combustion, Vol. 79, pp. 99-122, (2007) | |
Using advanced wall functions in the computation of buoyant Flows, S. A Omranian, H. Iacovides, ans B. P. Axcell, UK Heat Transfer 2007 Proceeding, Edinburgh, (2007) | |
Two Velocities hybrid RANS-LES of a trailing edge flow, Uribe, J. C., Jarrin, N., Prosser, R. and Laurence, D., IUTAM Symposium "Unsteady Separated Flows and their Control" - Corfu Greece June 2007, Vol. 14, pp. 63--76, (2007) | |
LES of turbulent flow for wall mounted cantilever cylinders of aspect ratio 6 and 10., Afgan I., Moulinec C., Prosser R., Laurence D., I. J. Heat & Fluid Flow, Vol. 28, pp. 561-574, (2007) | |
Flow and heat-transfer modelling of three-dimensional jet impingement on a concave surface , T.J. Craft, H. Iacovides, N.A. Mostafa, Proc. 5th Int. Symp. on Turbulence and Shear Flow Phenomena, Munich, (2007) | |
Computation of convective heat transfer in ribbed passages, H Iacovides and J Pujol, UK Heat Transfer 2007 Edinburgh, (2007) | |
Hybrid V2F RANS LES model and synthetic inlet turbulence applied to a trailing edge flow, Uribe, J.C., Jarrin, N., Prosser, R. and Laurence, D., Turbulence and Shear Flow Phenomena 5, Vol. 2, pp. 701-706, (2007) | |
Internal blade cooling: the Cinderella of C&EFD research in gas turbines, Review Paper, Iacovides H and Launder B.E, Proceedings of the Institution of Mechanical Engineers, Part A, Journal of Power and Energy, Vol. 221, pp. 265- 290, (2007) | |
Multi-jet impingment cooling on a concave surface, under stationary and rotating conditions, A Skillen and H. Iacovides, UK Heat Transfer, Edinburgh, (2007) | |
Numerical investigation of turbulent natural convection in an inclined square cavity with a hot wavy wall, M. Aounallah, Y. Addad, S. Benhamadouche, O. Imine, L. Adjlout, D. Laurence, Int. J. Heat & Mass Transfer, Vol. 50, pp. 1683-1693, (2007) | |
Development and application of wall-function treatments for turbulent forced and mixed convection flows, Craft, T.J., Gant, S.E., Gerasimov, A.V., Iacovides, H., Launder, B.E, Fluid Dyn. Res., Vol. 38, pp. 127-144, (2006) | |
Development of Flowfield and Surface Heat-transfer Measurement and Visualisation Techniques for Internal Rotating Cooling Flows in Gas Turbine Blades, H. Iacovides and B. E. Launder, AIAA-2006-3443, Invited paper, 25th AIAA Aerodynamic Measurements Technology & Ground Testing Conference, San Fransisco, (2006) | |
Prediction of developing turbulent flow in 90o-curved ducts using linear and non-linear low-Re k-ε models, M. Raisee, H. Alemi and H. Iacovides, International Journal for Numerical Methods in Fluids, Vol. 51, pp. 1379-1405, (2006) | |
Turbulent Natural Convection in Horizontal Coaxial Cylindrical Enclosures: LES and RANS Models, Y. Addad, D. Laurence, and M. Rabbitt, Turbulence, Heat and Mass Transfer 5, Dubrovnik, Croatia, (2006) | |
Synthetic turbulent inflow conditions based on a vortex method for large-eddy simulation, S. Benhamadouche, N. Jarrin, Y. Addad, D. Laurence, PCFD, Int. Journal, Vol. 6, pp. 50-57, (2006) | |
The Computation of Flow and Heat Transfer Through an Orthogonally Rotating Square-Ended U-Bend, Using Low-Reynolds-Number Models, K-S P. Nikas and H. Iacovides, International Journal for Numerical Methods in Heat and Fluid Flow, Vol. 16, pp. 827 – 844, (2006) | |
Advanced RANS modeling of wingtip vortex flows, Revell A, Iaccarino G, Wu X., Proceedings of the 2006 Summer Program, CTR, Stanford. USA.. Editor Moin., pp. 73-86, (2006) | |
Free Convection in an inclined square cavity with partial partitions on a wavy hot wall, M. Belkadi, M. Aounallah, O. Imine, L. Adjlout, Y. Addad, PCFD, Int. Journal, Vol. 6, pp. 428-434, (2006) | |
A computational study of the near-field generation and decay of wingtip vortices, Craft, T.J., Gerasimov, A.V., Launder, B.E., Robinson, C.M.E., Int. J. Heat Fluid Flow, Vol. 27, pp. 684-695, (2006) | |
Boundary Conditions for Low Mach Number Reacting Flows, Prosser, R., WSEAS Transactions On Fluid Mechanics and Aerodynamics, Vol. 5, pp. 1102-1107, (2006) | |
A stress-strain lag eddy viscosity model for unsteady mean flow, Revell, A.J., Benhamadouche, S., Craft, T.J., Laurence, D.R., Int. J. Heat Fluid Flow, Vol. 27, pp. 821-830, (2006) | |
A synthetic-eddy method for generating inflow conditions for LES, Jarrin, N., Benhamadouche, S., Laurence, D. and Prosser, R., Int. J. Heat and Fluid Flow, Vol. 27, pp. 585-593, (2006) | |
Parametric study of secondary gas injection into a conical rocket nozzle for thrust vectoring, Erdem E., et al., 42nd AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, Sacramento, CA, (2006) | |
Problems, Progress and Paradoxes in Modelling Internal Cooling of Rotating Gas-Turbine Blades, Iacovides H and Launder B. E, Invited Keynote Lecture, 5th Int. Symp. on Turbulence, Heat and Mass Transfer (THMT-06), Dubrovnik, Croatia, (2006) | |
Methods used and highlighted results from UMIST. . "FLOMANIA — A European Initiative on Flow Physics Modelling". , Uribe J, Utyuzhnikov S V, Revell A, Gerasimov A, Laurence D R P., Springer. ISBN 978-3-540-28786-5. 2006, (2006) | |
LES of a flow over a vertically mounted cylinder on a flat plate., Afgan I., Moulinec C., Laurence D., CMFF’06, 13th I.C. on Fluid Flow Technologies, Budapest, September 6-9, 2006, (2006) | |
Internal Blade Cooling: the Cinderella of Turbomachinery C&EFD, Launder B. E. and Iacovides H, Keynote Lecture, 12th International Heat Transfer Conference, Sydney, Augus, (2006) | |
Contribution to the control of fire-induced smoke flow in longitudinally ventilated tunnels, Galliot S, Revell A, Blay D, Vantelon J P, Deberteix P. 2006, Fire Technology, Vol. 25-3, pp. 315, (2006) | |
An analytical wall-function for turbulent flows and heat transfer over rough walls, Suga, K., Craft, T.J., Iacovides, H., Int. J. Heat Fluid Flow, Vol. 27, pp. 852-866, (2006) | |
A stress-strain lag EVM for mean unsteady and non-equilibrium flows, Revell A, Craft T J, Laurence D R P, Code_Saturne User Conference, Paris, France.. November 2006, (2006) | |
Near wall behaviour of RANS turbulence models and implications for wall functions, Kalitzin, G., Medic, G., Iaccarino, G and Durbin, P., Journal of Computational Physics, Vol. 204, pp. 265-291, (2005) | |
Improved Boundary Conditions for the Direct Numerical Simulation of Turbulent Subsonic Flows I: Inviscid Flows, Prosser, R., Journal of Computational Physics, Vol. 207, pp. 736-768, (2005) | |
turbulence model and its application to forced and natural convection, Hanjalic, K., Laurence, D., Popovac, M. and Uribe, J. C., Engineering Turbulence Modelling and Experiments 6, pp. 67-76, (2005) | |
A generalized analytical wall function, Suga, K., Craft, T.J., Iacovides, H., Trans. Japan Society of Mechanical Engineers B, Vol. 71 No. 711(2005-11), pp. 113-121, (2005) | |
Large Eddy Simulation of a symmetric bump on structured and unstructured grids, comparisons with RANS and T-RANS models., Benhamadouche, S., Uribe, J., Jarrin, N., Laurence, D., Turbulence and Shear Flow Phenomena 4, Vol. 1, pp. 325-330, (2005) | |
Computation of Flow and Heat Transfer in Abrupt Pipe Expansions using Non-Linear Eddy-Viscosity Models of Turbulence, T.J. Craft, H. Iacovides, P. Momeni, 9th UK National Heat Transfer Conference, Manchester, (2005) | |
An Analytical Wall-Function for Turbulent Rough Wall Heat Transfer, K. Suga, T.J. Craft, H. Iacovides, 4th International Symposium on Turbulence and Shear Flow Phenomena (TSFP4), Williamsburg, Virginia USA, (2005) | |
The experimental and numerical investigation of the flow field inside a solid propellant booster in presence of slag accumulation, Erdem E., 3rd Ankara International Aerospace Conference, (2005) | |
Large Eddy Simulation of flow across in-line tube bundles., Benhamadouche S., Laurence D., Jarrin N., Afgan I., Moulinec C., NURETH-11 (Nuclear Reactor Thermal-Hydraulics), Avignon FR, Oct. 2005, pp. paper 405, (2005) | |
Numerical study of turbulent flow in rotor-stator cavities, using linear and non-linear k-ε models, M. Raisee, A. Saneei and H. Iacovides, 6th European Conference on Turbomachinery, March 2005, Lille, France., (2005) | |
Development and implementation of the three equation stress-strain lag turbulence model, Revell A, Craft T J, Laurence D R P., Code_Saturne User Conference, Paris, France. November 2005, (2005) | |
Extending an analytical wall-function for turbulent flows over rough walls, K. Suga, T.J. Craft, H. Iacovides, ETMM6, ERCOFTAC International Symposium on Engineering Turbulence Modelling and Measurements, Sardinia, Italy, (2005) | |
Application of a Generalised RANS Wall-Function, to Recirculating Flows with Heat Transfer, T.J.Craft, S.E. Gant and H. Iacovides, ICCHMT4, 4th International Conference on Computational Heat and Mass Transfer, Paris, France, May 2005, (2005) | |
Investigation of Aerodynamic Profiles, D. Ammour, L. Adjlout, Military School E.M.P, Algiers, ALGERIA, (2005) | |
A stress-strain lag eddy viscosity model for unsteady mean flow, Revell A, Benhamadouche S, Craft T J, Laurence D R P, Yaqobi K., Engineering Turbulence Modelling and Experiments 6: ERCOFTAC International Symposium on Engineering Turbulence and Measurements - ETMM6, Sardinia, Italy.. Editor W. Rodi, M. Mulas, eds.. 22 May 2005, (2005) | |
Prediction of Developing Turbulent Flow in a 90o curved duct, using linear and non-linear low-Re k-ε models., M Raisee, H. Alemi and H Iacovides, Paper ESDA2004-58466, 7th Biennial ASME Conference on Engineering Design and Analysis, Manchester, UK, (2004) | |
Three-dimensional simulation of rotor-stator cavity flow , Craft, T.J., Gant S.E., Iacovides, H., Launder, B.E. and Serre, E, _CSAR Focus Magazine (http://www.csar.cfs.ac.uk/about/csarfocus/)_, Vol. 31, (2004) | |
A robust formulation of the v2f model, Laurence, D. Uribe, J. C. and Utyuzhnikov, S. V., Flow Turbulence and Combustion, Vol. 73, pp. 169-185, (2004) | |
The negatively buoyant wall-jet: LES database, Addad Y., Benhamadouche S., and Laurence D., Int. J. Heat fluid Flow, Vol. 25, pp. 795-808, (2004) | |
Prediction of Convective Heat Transfer Through Ribbed Channels Using a Lowe-Re Non-Linear k-ε Model. , M Raisee, A Noursadeghi and H. Iacovides, Int. Journal for Numerical Methods in Heat and Fluid Flow, Vol. 14, pp. 285-304, (2004) | |
The negatively buoyant turbulent wall jet: performance of alternative options in RANS modelling, Craft, T.J., Gerasimov, A.V., Iacovides, H., Kidger, J.W., Launder, B.E., Int. J. Heat and Fluid Flow, Vol. 25, pp. 809-823, (2004) | |
A new wall function strategy for complex turbulent flows, Craft, T.J., Gant, S.E., Iacovides, H., Launder, B.E., Numerical Heat Transfer, Vol. 45, pp. 301-318, (2004) | |
NUMERICAL STUDY ON MIXED CONVECTION AND THERMAL STREAKING IN POWER TRANSFORMER WINDINGS, E. J. Kranenborg, C. O. Olsson etc, CIGRE A2.38 Thermal Modelling, (2004) | |
The Computation of flow and heat transfer through square-ended U-bends, using Low-Reynolds-number models., K-P S Nikas and H Iacovides, Int. Journal for Numerical Methods in Heat and Fluid Flow, Vol. 14, pp. 305-324, (2004) | |
Turbulent Flow and Heat Transfer in Stationary and Rotating Cooling Passages with Inclined Ribs on Opposite Walls, H. Iacovides and M. Raisee, ., ASME/IGTI International Gas-Turbine and Aero Congress, Vienna, (2004) | |
THERMAL PERFORMANCE OF POWER TRANSFORMERS: THERMAL CALCULATION TOOLS FOCUSED ON NEW OPERATING REQUIREMENTS, A. TANGUY, J.P. PATELLI etc, CIGRE A2.38 Thermal Modelling, (2004) | |
The negatively buoyant turbulent wall jet: performance of alternative options in RANS modelling, Craft, T.J., Gerasimov, A.V., Iacovides, H., Kidger, J.W., Launder, B.E, Proc. 4th Int. Symp. on Turbulence, Heat and Mass Transfer, Antalya, Turkey, (2003) | |
Synthetic turbulence inflow conditions for large-eddy simulation, Jarrin N., Benhamadouche S., Addad Y., Laurence D., 4th Int. Symposium on THMT, Turkey, (2003) | |
On the Effects of inclines Ribs on the Flow and Thermal Development in Straight Cooling Passages; An Experimental and Computational Study, H. Iacovides, G. Kelemenis and M. Raisee, Journal of.Expt Thermal and Fluid Science, Vol. 27, pp. 283-294, (2003) | |
Comparison of EVM and DSM in Flow and Heat Transfer of Turbine Blades Internal Cooling Passages with a Wall Function Method, Y. Okita, and H. Iacovides, ASME Journal of Turbomachinery, Vol. 125, pp. 585-597, (2003) | |
Application of a New Wall-Function Strategy to Turbulent Mixed and Natural Convection in Vertical Flows, T.J. Craft, A. V. Gerasimov, H. Iacovides and B. E. Launder, UK National Heat Transfer Conference, Oxford, (2003) | |
A new wall-function strategy applied to mixed convection in vertical annular passages, Craft, T.J., Gerasimov, A.V., Iacovides, H., Launder, B.E., Proc. Conference on Modelling Fluid Flow, The 12th International Conference on Fluid Flow Technologies, Budapest, Hungary, (2003) | |
Two-time-scale turbulence modelling of a fully-pulsed axisymmetric air jet, Bremhorst, K., Craft, T.J., Launder, B.E., Proc. 3rd Int. Symposium on Turbulent Shear Flow Phenomena, Sendai, Japan, (2003) | |
The negatively buoyant wall-jet: LES database, Addad Y., Benhamadouche S., and Laurence D., 4th Int. Symposium on THMT, Turkey, 12-17 October, (2003) | |
Large-Eddy Simulation of a forward-backward facing step for acoustic source identification, Addad Y., Laurence D., Talotte C., Jacob M. C., Int. J. of Heat and Fluid Flow, (2003) | |
Precessing vortex structures in Flow within rotor-stator disc cavities: DNS and visualization studies., E. Serre, O. Grazny, H. Iacovides, P Bontoux and B E. Launder, Proc of Ninth European Turbulence Conference, Southampton, (2002) | |
Large eddy simulation of an Ahmed reference model, Howard, R. J. A. and Pourquie, M., Journal of Turbulence, Vol. 3 (12), pp. 1-18, (2002) | |
A linearised turbulent production in the k-epsilon model., Guimet V., Laurence D., 5th Engineering Turbulence Modelling and Measurements. Mallorca, Spain. 16-18th September 2002, W. Rodi & N. Fueyo Editors, Elsevier., (2002) | |
Progress in the generalization of wall-function treatments, Craft, T.J., Gerasimov, A.V., Iacovides, H., Launder, B.E, Int. J. Heat Fluid Flow, Vol. 23, pp. 148-160, (2002) | |
Comparison of Large Eddy Simulation and experimental results of the flow around a forward-backward facing step, Talotte C., Addad Y., Laurence D., Jacob M. C., Giardi H., ASME Fluids Engineering Division Summer Meeting, Canada, Quebec, July 14-18, (2002) | |
The Computation of flow and heat transfer through an orthogonally rotating square-ended U-bend, using low-Reynolds-number models, K.S..P. Nikas and H. Iacovides, 5th International Symposium on Engineering Turbulence Modelling and Measurements, Majorca, Spain, (2002) | |
Precessing Vortex Structures in Turbulent Flow within Rotor-Stator Disc Cavities, O. Grazny, H. Iacovides and B. E. Launder, Flow, Turbulence and Combustion, Vol. 69, pp. 51-61, (2002) | |
Computation of Flow and Heat Transfer in Two-Dimensional Rib-Roughened Passages, using low-Reynolds-number turbulence models, Iacovides H and Raisee M, Int J. Numerical Methods Heat and Fluid Flow, Vol. 11, pp. 138-155, (2001) | |
Principles and performance of TCL-based second-moment closures, Craft, T.J., Launder, B.E., Flow Turbulence & Combustion, Vol. 66, pp. 355-372, (2001) | |
Comparison of EVM and DSM in Flow and Heat Transfer of Turbine Blades Internal Cooling Passages with a Wall Function Method, Y. Okita, H. Kodama, S. Yamawaki and H. Iacovides, ECCOMAS CFD 2001 Conference, Swansea, (2001) | |
Dynamic and thermal measurements of flow in a rotating U-bend with 45o ribs, Iacovides H., Jackson D. C., Kelemenis G. and Launder B. E and Y-M Yuan, Int J. of Heat and Fluid Flow, Vol. 22, pp. 308-314, (2001) | |
Reynolds-stress modeling of afterbody flows, Batten, P., Craft, T.J., Leschziner, M.A., The Aeronautical Journal, Vol. 105, pp. 297-306, (2001) | |
The computation of flow and heat transfer through square-ended U-bends, using low-Reynolds-number models, H. Iacovides and K. S. P. Nikas, 2nd Int. Symp. On Turbulent Shear Flow Phenomena, Stockholm, Sweden, (2001) | |
On the Effects of inclines Ribs on the Flow and Thermal Development in Straight Cooling Passages; An Experimental and Computational Study, H. Iacovides, G. Kelemenis and M. Raisee, 4th European Conference in Turbomachinery, Florence, Italy, (2001) | |
On the spreading mechanism of the three-dimensional turbulent wall jet, Craft, T.J., Launder, B.E., J. Fluid Mech., Vol. 435, pp. 305-326, (2001) | |
Vortical Time-Dependent Flow Structures in Flow within a Rotor-Stator Disc Cavity, O. Czarny, H. Iacovides, D.C. Jackson and B.E. Launder, Euromech Colloquium 426, Swirling Flows, Trondheim, Norway, (2001) | |
On modelling periodic motion with turbulence closures, Cotton, M.A., Craft, T.J., Guy, A.W., Launder, B.E., Flow Turbulence & Combustion, Vol. 67, pp. 143-158, (2001) | |
The measurement of local wall heat transfer in stationary U-ducts of strong curvature, with smooth and rib roughened walls, H. Iacovides, D. C. Jackson, G. Kelemenis, and B. E. Launder, ASME Journal of Turbomachinery, Vol. 122, pp. 386-392, (2000) | |
The application of wavelets to reacting flows, Prosser, R. and Cant, R.S., Proceedings of the Institution of Mechanical Engineers - Part C: Journal of Mechanical Engineering Science, Vol. 214, pp. 1355-1362, (2000) | |
Computation of axisymmetric rotor-stator flows related to cooling passages of electrical generators, H Iacovides, M A Leschziner and H-Y Li, NAFEMS International Journal of CFD Case Studies, Vol. 2, pp. 3-17, (2000) | |
Turbulent, constant-temperature, plane-channel flow, P.G. Tucker and H. Iacovides, 1st NAFEMS Workbook of CFD Examples, Chapter 3, Edited by P.G. Tucker, (2000) | |
Second-moment modelling of developing and self-similar three-dimensional turbulent free-surface jets, Craft, T.J., Kidger, J.W., Launder, B.E, Int. J. Heat Fluid Flow, Vol. 21, pp. 338-344, (2000) | |
Simulation and Modelling of a skewed turbulent channel flow, Howard, R.J.A. and Sandham, N.D., Flow Turbulence and Combustion, Vol. 65, pp. 83-109, (2000) | |
Dynamic and thermal measurements of flow in a rotating U-bend with 45-deg ribs, . Iacovides H., Jackson D. C., Kelemenis G. and Launder B. E, 3rd International Conference on Turbulence, Heat and Mass Transfer, Nagoya, Japan, (2000) | |
The theoretical development of wavelets in reacting flows, Prosser, R. and Cant, R.S., Proceedings of the Institution of Mechanical Engineers - Part C: Journal of Mechanical Engineering Science, Vol. 214, pp. 1363-1373, (2000) | |
Comparison of near-wall behaviour and its effect on heat transfer for k- and k- turbulence models in rib-roughened 2-D channels, J. Brendberg, L. Davidson and H. Iacovides, 3rd International Conference on Turbulence, Heat and Mass Transfer, Nagoya, Japan, (2000) | |
A novel open flow microflow sensor for reduced fouling of chemical , C.M. Gregory, J.V. Hatfield, S. Higgins, H. Iacovides, P.J. Vadgama, Sensors and Actuators B: Chemical 65 (1-3), pp. 305-309, (2000) | |
One-dimensional modelling of foulant reduction in a microflow, amperometric-sensor system, S. W. Higgins, C. M. Gregory, J. V. Hatfield, H. Iacovides and P. J. Vadgama, Journal of Medical Engineering and Technology, Vol. 23, pp. 102-107, (1999) | |
Progress in the use of non-linear two-equation models in the computation of convective heat-transfer in impinging and separated flows, Craft, T.J., Iacovides, H., Yoon, J.H., Flow Turbulence & Combustion, Vol. 63, pp. 59-80, (1999) | |
Reynolds-stress-transport modeling for compressible aerodynamics applications, Batten, P., Craft, T.J., Leschziner, M.A., Loyau, H., AIAA Journal, Vol. 37, pp. 785-796, (1999) | |
Two-equation turbulence modelling of a transitional separation bubble, Howard, R. J. A., Alam, M. and Sandham, N. D., Flow Turbulence and Combustion, Vol. 63, pp. 175-191, (1999) | |
The Numerical Computation of Turbulent Convective Heat Transfer, H Iacovides, Invited Keynote Paper, 6th UK National Conference on Heat Transfer, September 1999, Heriot-Watt University, Edinburgh., (1999) | |
The measurement of local wall heat transfer in stationary U-ducts of strong curvature, with smooth and rib roughened walls, H. Iacovides, D. C. Jackson, G. Kelemenis, and B. E. Launder, Int. Gas-Turb and Aero Congress, Indianapolis, USA, (1999) | |
The computation of turbulent flow through stationary and rotating U-bends with rib-roughened surfaces, H. Iacovides, International Journal for Numerical Methods in Fluids, Vol. 29, pp. 865-876, (1999) | |
The measurement of local wall heat transfer in U-ducts of strong curvature, with smooth and rib roughened walls., H. Iacovides, D.C. Jackson, G. Kelemenis, and B.E. Launder, Engineering Turbulence Modelling and Experiments 4, Corsica, France, Ed W Rodi and D Laurence, ELSEVIER, (1999) | |
Recent progress in the computation of flow and heat transfer in internal cooling passages of turbine blades, H. Iacovides and M Raisee, International Journal of Heat and Fluid Flow, Vol. 20, pp. 320-328, (1999) | |
Experiments on local heat transfer in a rotating square-ended U-bend., . H. Iacovides, D. C. Jackson G. Kelemenis B. E. Launder and Y-M Yuan., International Journal of Heat and Fluid Flow, Vol. 20, pp. 302-310, (1999) | |
A novel open-flow microflow sensor for reduced fouling of chemical sensors in physiological sampling environment., Gregory C, Higgins S, Hatfield J, Iacovides H and Vadgama P J, Technical Digest Seventh international meeting on Chemical Sensors, IMCS7, 580-582, Beijing, China, (1999) | |
An experimental study of a rib-roughened rotating U-bend flow, H Iacovides, D C Jackson, B E Launder and Y-M Yuan, Journal of Experimental Thermal and Fluid Science, Vol. 19, pp. 151-159, (1999) | |
On the use of wavelets in computational combustion, Prosser, R. and Cant, R.S., Journal of Computational Physics, Vol. 147, pp. 337 - 361, (1998) | |
LDA study of flow development through an orthogonally rotating U-Bend of strong curvature and rib-roughened walls, Iacovides H, Jackson D C, Ji H, Kelemenis G, Launder B E and Nikas K, ASME Journal of Turbomachinery, Vol. 108, pp. 386-391, (1998) | |
Recent progress in the computation of flow and heat transfer in internal cooling passages of turbine blades, H. Iacovides and M Raisee, 2nd EF Conference on Turbulent Heat Transfer, Manchester, UK, (1998) | |
Application of Turbulence Models in the Simulation of Complex Flows with Forced , H. Iacovides, Invited Paper, ECOMAS98, Athens, Greece, Sept., (1998) | |
Developments in a low-Reynolds-number second-moment closure and its application to separating and reattaching flows, Craft, T.J., Int. J. Heat Fluid Flow, Vol. 19, pp. 541-548, (1998) | |
Computation of flow and heat transfer through rotating ribbed passage, H Iacovides, International Journal of Heat and Fluid Flow, Vol. 19, pp. 393-400, (1998) | |
Recent progress in the experimental investigation of flow and local wall heat transfer in internal cooling passages of gas-turbine blades, H. Iacovides, D.C. Jackson, G. Kelemenis, B.E. Launder and Y-M Yuan, 2nd EF Conference on Turbulent Heat Transfer, Manchester, UK, (1998) | |
Prediction of turbulent transitional phenomena with a nonlinear eddy-viscosity model, Craft, T.J., Launder, B.E., Suga, K., Int. J. Heat Fluid Flow, Vol. 18, pp. 15-28, (1997) | |
Development and application of a cubic eddy-viscosity model of turbulence, Craft, T.J., Launder, B.E., Suga, K., Int. J. Heat and Fluid Flow, Vol. 17, pp. 108-115, (1996) | |
Recent developments in second-moment closure for buoyancy-affected flows, Craft, T.J., Ince, N.Z., Launder, B.E., Dynamics of Atmospheres and Oceans, Vol. 23, pp. 99-114, (1996) | |
A Reynolds stress closure designed for complex geometries, Craft, T.J., Launder, B.E., Int. J. Heat Fluid Flow, Vol. 17, pp. 245-254, (1996) | |
Impinging jet studies for turbulence model assessment. Part II: An examination of the performance of four turbulence models, Craft, T.J., Graham, L.J.W., Launder, B.E., Int. J. Heat Mass Transfer, Vol. 36, pp. 2685-2697, (1993) | |
On the adequacy of the thin-shear-flow equations for computing turbulent jets in stagnant surroundings, El Baz, A., Craft, T.J., Ince, N.Z., Launder, B.E., Int. J. Heat Fluid Flow, Vol. 14, pp. 164-169, (1993) | |
New wall-reflection model applied to the turbulent impinging jet, Craft, T.J., Launder, B.E, AIAA Journal, Vol. 30, pp. 2970-2972, (1992) | |
Schlieren and Laser Sheet Investigation of Methane-air Co-flow Flames, Q. Wang, H. Gohari Darabkhani and Y. Zhang, journal of Experiments in Fluids, Vol. under review, (-2010) |